Toggle Nav

MotionNET

Motionnet is a high-speed serial communication system that includes a Master card and Slave modules.

PISO-MN200T
PCI Bus, Dual-line Motionnet Master Card with Terminal Block

Maximum Communication Speed: 20 Mbps

Distributed motion control up to 128 axes

Distributed I/O points up to 4096 points

Parallel I/O Ports: 8 Input and 4 Output channels

Optional quadrature encoder input for linear scale or manual pulse generator input
Lead time 21-30 days
PISO-MN200
PCI Bus, Dual-line Motionnet Master Card with RJ-45 Connector

Maximum Communication Speed: 20 Mbps

Distributed motion control up to 128 axes

Distributed I/O points up to 4096 points

Parallel I/O Ports: 8 Input and 4 Output channels

Optional quadrature encoder input for linear scale or manual pulse generator input
Lead time 21-30 days
MN-SERVO-DAA-EC
Distributed Motionnet Single-axis Motion Control Module with e-CON Mini-Clamp connector for Delta ASDA-A/A2

Maximum communication speed: 20 Mbps

Pulse Output Rate: 6.6 MHz (Max.)

Control up to 64 axes per line

Multi-axis linear interpolation function

2-axis circular interpolation function

T/S-curve acceleration and deceleration

Change speed and position on the fly

Slow down sensor, home sensor, positive and negative limit sensors for each axis

Software limit and compare trigger output

Three-way isolation for power, communication and I/O.(Provide better noise immunity and device protection)

The EC module equipped with Mini-Clamp connector provide for an easier and debris-free wire termination process
Lead time 21-30 days
MN-SERVO-YSV-EC
Distributed Motionnet Single-axis Motion Control Module with e-CON Mini-Clamp connector for Yaskawa Sigma II/III/V

Maximum communication speed: 20 Mbps

Pulse Output Rate: 6.6 MHz (Max.)

Control up to 64 axes per line

Multi-axis linear interpolation function

2-axis circular interpolation function

T/S-curve acceleration and deceleration

Change speed and position on the fly

Slow down sensor, home sensor, positive and negative limit sensors for each axis

Software limit and compare trigger output

Three-way isolation for power, communication and I/O.(Provide better noise immunity and device protection)

The EC module equipped with Mini-Clamp connector provide for an easier and debris-free wire termination process
Lead time 21-30 days
MN-SERVO-PA4-EC
Distributed Motionnet Single-axis Motion Control Module with e-CON Mini-Clamp connector for Panasonic MINAS A4

Maximum communication speed: 20 Mbps

Pulse Output Rate: 6.6 MHz (Max.)

Control up to 64 axes per line

Multi-axis linear interpolation function

2-axis circular interpolation function

T/S-curve acceleration and deceleration

Change speed and position on the fly

Slow down sensor, home sensor, positive and negative limit sensors for each axis

Software limit and compare trigger output

Three-way isolation for power, communication and I/O.(Provide better noise immunity and device protection)

The EC module equipped with Mini-Clamp connector provide for an easier and debris-free wire termination process
Lead time 21-30 days
MN-SERVO-MJ3-EC
Distributed Motionnet Single-axis Motion Control Module with e-CON Mini-Clamp connector for Mitsubishi MELSERVO-J3/J4

Maximum communication speed: 20 Mbps

Pulse Output Rate: 6.6 MHz (Max.)

Control up to 64 axes per line

Multi-axis linear interpolation function

2-axis circular interpolation function

T/S-curve acceleration and deceleration

Change speed and position on the fly

Slow down sensor, home sensor, positive and negative limit sensors for each axis

Software limit and compare trigger output

Three-way isolation for power, communication and I/O.(Provide better noise immunity and device protection)

The EC module equipped with Mini-Clamp connector provide for an easier and debris-free wire termination process
Lead time 21-30 days
MN-AD8-DIN
Distributed Motionnet 8-ch Analog Input Module

8 +/- 10 V analog input

RJ-45 communication port

2 way isolation on power, communication

16-bit high resolution, 0.3mV min

High precision and low shift reference 5V inside

Hardware offset, gain calibration to EEPROM storage

Rapid A/D transformation. Sampling rate = 250 ksps
Lead time 21-30 days
MN-DA2-DIN
Distributed Motionnet 2-ch Analog Output Module

Dual channel +/- 10 V analog output

RJ-45 communication port

2 way isolation on power, communication

16-bit high resolution, 0.3mV min

Software calibration of offset/gain

Rapid output rate, Slew rate = 20 V / us

High precision, DNL = +/-1 LSB, INL = +/-3 LSB
Lead time 21-30 days
MN-3257
Distributed Motionnet 32-ch Isolated DO Module

Maximum communication speed: 20 Mbps

32-ch isolated digital outputs

Each Motionnet transfer Line: connect modules up to 64

Designing isolation protection: power, communication, I/O

LED Diagnostics for communication and I/O status

The internal flywheel diode of each output port can be connected to different sources of power individually

High current sinking capability (200 mA)
Lead time 21-30 days
MN-3254
Distributed Motionnet 16-ch Isolated DI, 16-ch Isolated DO Module

Maximum communication speed: 20 Mbps

16-ch isolated digital inputs, 16-ch isolated digital outputs

Each Motionnet transfer line: connect modules up to 64

Designing isolation protection: power, communication, I/O

LED Diagnostics for communication and I/O status

Each input port can be specified as NPN or PNP (12~24 V)

The internal flywheel diode of each output ports can be connect to different sources of power individually

High current sinking capability (200 mA)
Lead time 21-30 days
MN-3253
Distributed Motionnet 32-ch Isolated DI Module

Maximum communication speed: 20 Mbps

32-ch isolated digital inputs

Each Motionnet transfer Line: connect modules up to 64

Designing isolation protection: power, communication, I/O

LED Diagnostics for communication and I/O status

Each port can be specified as NPN or PNP (12~24 V)
Lead time 21-30 days
MN-2091U
Distributed Motionnet Single-axis Universal Motion Control Module

Maximum communication speed: 20 Mbps

Pulse Output Rate: 6.6 MHz (Max.)

Control up to 64 axes per line

Multi-axis linear interpolation function

2-axis circular interpolation function

T/S-curve acceleration and deceleration

Change speed and position on the fly

Slow down sensor, home sensor, positive and negative limit sensors for each axis

Software limit and compare trigger output

Three-way isolation for power, communication and I/O.(Provide better noise immunity and device protection)

Suitable for controlling a variety of servo drivers and stepper drivers
Lead time 21-30 days
MN-MP4U-DIN
Distributed Motionnet Four-axis Universal Motion Control Module with RJ-45 Connector. Includes 4x "CA-PC26M"

Maximum communication speed: 20 Mbps

Pulse Output Rate: 6.6 MHz (Max.)

Control up to 64 axes per line

Multi-axis linear interpolation function

2-axis circular interpolation function

T/S-curve acceleration and deceleration

Change speed and position on the fly

Slow down sensor, home sensor, positive and negative limit sensors for each axis

Software limit and compare trigger output

Three-way isolation for power, communication and I/O.(Provide better noise immunity and device protection)

Suitable for controlling a variety of servo drivers and stepper drivers
Lead time 21-30 days
PCIe-MN200
PCI Express Bus, Dual-line Motionnet Motion Control Module with RJ-45

Maximum Communication Speed: 20 Mbps

Distributed motion control up to 128 axes

Distributed I/O points up to 4096 points

Easy connection using RJ-45 phone jack connector

Parallel 1/0 Ports: 8 Input and 4 Output channels

Optional quadrature encoder input for linear scale or manual pulse generator input
Lead time 21-30 days