Ethernet Adapters

mPCIe Single Port Gigabit SFP Ethernet Adapter (1x SFP)

• Single-port 1000MBASE-X controller with integrated MAC and PHY
• Four transmit quest and four receive queues per port
• 1000Mbps Fiber Ethernet networks transition

PCIe x4 Quad-port PoE+ Gigabit Vision Frame Grabber Card (Intel I210)

• Intel master chip scheme
• Mainly designed for industrial scene visual detection servers and equipment
• 30W PoE+ output, 4-Pin psu interface
• Adaptive to power output
• Large heatsink for heat dissipation

Industrial M.2 PCIe Ethernet Expansion Card_2101i

• Dual-Lane (x2) PCI-Express with throughput up to 16GT/s
• Fully compliant with PCI-Express Base Specification Rev.4.0
• Integrated 100M/ 1000M/ 2.5G/ 5G/ 10Gbps transceiver
• Complies with EN61000
• Compliant with IEEE 802.3, IEEE802.3u, IEEE 802.3ab, IEEE 802.3bz and IEEE 802.3an
• IEEE 802.3x & IEEE 802.3z flow control
• Support single isolated 10GbE LAN port
• Lowest power consumption 10GbE expansion solution
  

M.2 2280 (B+M key) 2-port 1GbE SFP Ethernet board (-40℃~+85℃)

• Single-Lane (x1) PCI-Express with throughput up to 5.0/2.5GT/s
• Standard SFP modules supporting data rates of up to 1Gbps
• IEEE 802.3 for 1000Base-SX/1000Base-LX, IEEE 802.3ap for 1000Base-KX, PICMG 3.1 for 1000Base-BX
• Support Wake-on-LAN and Hot-Swap function
• Allowing for long-distance communication and easy upgrades
• Modular Design, flexibility and scalability
• Support multiple SFP ports, both single-mode or multi-mode

M.2 2280 (B+M key) 1-port 1GbE SFP Ethernet board (-40℃~+85℃)

• Single-Lane (x1) PCI-Express with throughput up to 5.0/2.5GT/s
• Standard SFP modules supporting data rates of up to 1Gbps
• IEEE 802.3 for 1000Base-SX/1000Base-LX, IEEE 802.3ap for 1000Base-KX, PICMG 3.1 for 1000Base-BX
• Support Wake-on-LAN and Hot-Swap function
• Allowing for long-distance communication and easy upgrades
• Modular Design, flexibility and scalability
• Support multiple SFP ports, both single-mode or multi-mode

M.2 2230 (A+E key) 1 port 2.5GbE isolated Ethernet board (-40℃~+85℃)

PCIe x4 Quad-port PoE+ 2.5GbE Vision Frame Grabber Card (Intel I226 based)

• Intel master chip scheme
• Mainly designed for industrial scene visual detection servers and equipment
• 30W PoE+ output, 4-Pin psu interface
• Adaptive to power output
• Large heatsink for heat dissipation

PCI Express Power over Ethernet card, 4-port 1000 Base(T), 802.3at/af compliant, low profile

• PCI Express® x1 compliant
• Support for total 90 watts under full load
• Support link aggregation/jumbo frames (9 Kbyte)
• Supports 12V~24V DC input power

PCI Express Power over ethernet card, 6-port 1000 Base(T), 802.3at/bt compliant

• Provide 6 x10/100/1000Base-T(X) PoE (P.S.E.) ports
• Total 180 Watts power budget with maximum 90 Watts per port
• PoE power sourced from 12~24VDC of ATX power
• Each LAN port supports both PoE and Non-PoE connections (Auto Detect & Classification)
• Supports SW/RDK (IEI GPOE Management Software Tools)
• Compatible with x4, x8 and x16 PCIe slots
• IEEE 802.3at/bt PoE compliant

PCIe x16 Dual-port 100G QSFP+ Ethernet Network Adapter(E810)

• Intel master chip scheme
• PCI Express v4.0 x16
• iWARP and RoCEv2 Remote Direct Memory Access (RDMA)
• Intel Ethernet Adaptive Virtual Function
• Enhanced server virtualizations: 256 VFs, 768 VSIs
• IEEE 1588 Precision Time Protocol with per-packet time stamping

Intel® Ethernet Controller XL710-BM1 based Network Interface Card with 4 x SFP+ by 1 PCIe 3.0 x 8 interface

• 1 x Intel® Ethernet Controller XL710-BM1
• 4 ports 10 GbE SFP+ connector
• PCIe 3.0 x8

Intel® Ethernet Controller EZE810CAM2 based Network Interface Card with 2 x QSFP28 by 1 PCIe 4.0 x8 interface

• 1 x Intel E810 Ethernet controller
• 2 ports 100GbE QSFP28 connector
• 1 x PCIe 4.0 x8

OCP3.0 Quad-port Gigabit Ethernet Network Adapter (Intel I350)

OCP3.0 Dual-port 100G QSFP28 Ethernet Network Adapter (Intel E810)

OCP 3.0 Quad-port Mezzanine 10G SFP+ Ethernet Network Adapter (Intel XL710)

OCP 3.0 Dual-port 10G SFP+ Ethernet Network Adapter (Intel X710)

Intel® Ethernet Controller EZE810CAM2 based Network Interface Card with 2 x QSFP28 by 1 PCIe 4.0 x16 interface

• 1 x intel E810 Ethernet controller
• 2 ports 100GbE QSFP28 connector
• 1 x PCIe 4.0 x16

PCIe x1 Single-port Gigabit SFP Ethernet Network Adapter  (Realtek RTL8111H Based)

PCIe x16 Single-port 100G QSFP+ Ethernet Network Adapter(E810)

• Intel master chip scheme
• PCI Express v4.0 x16
• iWARP and RoCEv2 Remote Direct Memory Access (RDMA)
• Intel Eth Adaptive Virtual Function
• Enhanced server virtualizations: 256 VFs, 768 VSIs
• IEEE 1588 Precision Time Protocol with per-packet time stamping

PCIe x4 Dual-port 10G PoE+ Ethernet Frame Grabber Card (Intel X550)

• Intel master chip scheme
• Mainly designed for industrial scene visual detection servers and equipment
• 30W PoE+ output, 4-Pin psu interface
• Adaptive to power output
• Heatsink & Fan for heat dissipation

Dual-Port 100 Gb/s QSFP28 module with Intel® E810

• Supports multiple port speeds with a single architecture: 100/50/25/10/1GbE
• Intel® Ethernet Adaptive Virtual Function (Intel® Ethernet AVF)
• Enhanced server virtualization: 256 VFs, 768 VSIs
• Enhanced Data Plane Development Kit (DPDK)
• Suitable for data centers or cloud computing

2-port 10GbE PoE PCIe Card

• Intel® Ethernet Controller X550-AT2, up to 10 Gbps data rate
• Supports 15.5KB Jumbo Frame and IEEE 1588
• Compliant with IEEE802.3at to deliver 25.5W per port
• PCI Express x4 compliant
• PoE power on/off via Power Manager software and API
• Operating temperature range from 0°C to 55°C

4-port PCI Express GigE Frame Grabber Card

• PCI Express x4 compliant
• 2 or 4 independent Gigabit PoE ports
• Supports 9.5KB Jumbo Frame and IEEE 1588
• Compliant with IEEE802.3at to deliver 30W at 54 VDC per port
• Up to 20/120W PoE power from PCIe 6-pin ATX power connector
• 0°C to +60°C operating temperature range
• PoE power management software
• Supports LAN port smart on/off