Computers

External Fan with 4pin Terminal Block Plug, Mounting Bracket. Support Smart Fan Function

• Cincoze DS & DX-series
• 4.8Watts, 12V DC
• Dimension: 160mm x 145mm x 41.4mm

External Fan with 2x 4pin Terminal Block Plug and Mounting Bracket, Support Smart Fan Function

• Cincoze GM-series
• 18.7Watts, 12V DC
• Dimension: 220mm x 200mm x 19.8mm

• 26 TOPS AI Computing delivered by Hailo-8 VPU
• M.2 2242 w/ optional 2280 extensions
• -20~65°C operating temp. w/ optional heatsink
• Typical 2.5W Low power consumption
• Rich AI Dev. Toolkits including Model Library, Model Converter, Runtime SDK Integration

Industrial M.2 PCIe CAN Bus Expansion Card (-40℃~+85℃) 

• Single-Lane (x1) PCI-Express with throughput up to 5.0 / 2.5GT/s
• Fully compliant with PCI-Express Base Specification Rev. 2.0
• Meet the Requirements of the ISO 11898 High Speed Standard
• CAN bus 2.0B EFF backward compatible with 2.0A SFF
• Support baud rate 10/20/50/100/125/250/500/800/1000K
• Support CAN message acceptance filter
• Support 2.5kV isolated per port

ATX Motherboard with LGA1700 Socket 12th Gen Intel® Core™ i9/i7/i5/i3, Pentium® or Celeron® Processor, Intel® Q670E, USB 3.2 Gen1x1 , SATA 3.0, GbE and 2.5GbE LAN, VGA, DVI-D, and HDMI

• LGA1700 socket 12th gen Intel® Core™ i9/i7/i5/i3, Pentium® or Celeron® processor (Alder Lake S)
• Four 288-pin DDR4-3200 non-ECC Long-DIMM, up to 128GB
• Supports triple-view with VGA, DVI-D, and HDMI connectivity
• Supports M.2 Key M 2280 and Key B 2230
• 6 USB 3.2 Gen1x1 and 2 USB 3.2 Gen1x1 (internal)
• TPM 2.0 supported (optional)

Micro ATX Motherboard with LGA1700 Socket 13th/12th Gen Intel® Core™ Processor, Intel® H610, USB 3.2 Gen1x1 , SATA 3.0, Dual GbE, 2.5GbE, VGA, DP and DVI-D

• LGA1700 socket 13th/12th gen Intel® Core™ i9/i7/i5/i3, Pentium® or Celeron® processor (Raptor Lake S/Alder Lake S)
• Dual 288-pin DDR4-3200 Long-DIMM, up to 64GB
• DisplayPort, VGA, DVI-D with triple-view support
• Supports M.2 Key M 2280/2242
• Supports USB 3.2 Gen1x1 and USB 2.0
• Supports TPM 2.0 (optional)

NVIDIA Quadro RTX A5500 PCIe 24GB DSFH , 4 x DisplayPort, Dual Slot

• 12240 CUDA cores
• 320 Tensor cores
• 80 RT cores
• 34.1 TFLOPS
• Dual slot, Full height
• Dimension (L x H) 266.8 x 111,8 mm

NVIDIA Quadro RTX 5000 Ada 32GB PCI-Ex16 DP*4 FS , 4 x DisplayPort, Dual Slot

• 12800 CUDA cores
• 400 Tensor cores
• 100 RT cores
• 65.3 TFLOPS
• Dual slot, Full height
• Dimension (L x H) 266.8 x 111,8 mm

NVIDIA Quadro RTX 6000 Ada PCIe 48GB DSFH- 4 x DisplayPort, Dual Slot

• 18176 CUDA cores
• 568 Tensor cores
• 142 RT cores
• 91.1 TFLOPS
• Dual slot, Full height
• Dimension (L x H) 266.8 x 111,8 mm

mPCIe to dual isolated J1939/CANopen Module

• Compliant with ISO 11898-2
• Support baud rate 100/125/250/500(default)/800/1000K
• Support CAN message acceptance filter, listen-only mode
• Keep configuration after hardware reboot
• Up to 7,800 frame/s (receiving at 1Mbps, EID, 8byte data)
• Additional driver to support Linux SocketCAN
• Support SAE J1939/CANopen high layer protocol
• Termination resistor enabled/disabled by jumper
• Complies with EN61000-4-5 2.5kV Surge protection
• Complies with IEC 60950-1:2005 + A1: 2009 + A2:2013 2.5kV HiPOT protection
• Complaint with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
• Supports 3rd mounting hole and USB Pin header for out-ofminicard installation
• 30μ” golden finger, 3-year warranty
• Industrial Temperature (-40°C to +85°C) support

Wi-fi 7 enterprise Access Point mPCIe card

• Qualcomm QCN9274 chipset
• Dual diplexer setup enables 2x2+2x2 data streams on the 2.4 and 5 GHz bands concurrently with only 2 antennas

LoRaWAN Gateway Module

• Latest Semtech SX1302 gateway chipset solution
• Long-range wide area IoT gateway
• Support embedded LNS software for linux-based OS
• LoRaWAN protocol for both private and public system application
• Standard mini-PCIe form factor
• Global LoRaWAN Frequency Plans

Industrial LoRaWAN Gateway

• Latest Semtech SX1302 gateway chipset solution, it doubles the packet processing speed
• Embedded LoRaWAN Network Server for both private and public system application
• Compatible with Multiple Network Servers like Actility, The Things Network, Chirpstack, AWS, etc
• Supports Modbus/TCP, MQTT, BacNet, OPCUA protocols
• Build-in Node-Red, LoRaWAN network server and Edgelink software packages
• Global LoRaWAN Frequency Plans
• DIN rail and wall mounting design
• Backhaul 4G (by additional adapter)

LoRaWAN Smart Vibration Sensor

• LoRaWAN wireless connectivity
• Built-in 3-axis accelerometer and temperature sensor
• On-board computing. Directly sends VRMS, ARMS, Peak, Displacement, Kurtosis, Crest factor, Skewness and Standard Deviation values to applications
• Support battery power supply, no wiring installation needed
• Easy settings with user friendly interfaces on WISE Studio utility
• ISO 10816-1 compliant
• Support wide temperature -20 ~ 80 °C (Battery-powered)
• IP66 enclosure design

LoRaWAN Wireless Water Leakage Sensor

• LoRaWAN wireless connectivity
• 3.5mm water line diameter
• Battery life up till 5 years@25 °C, 15 mins interval setting
• Easy to deploy and maintain

LoRaWAN Temperature PT1000 Round Head Probe Sensor

• LoRaWAN wireless connectivity
• -70°C to 200°C temperature detection range
• IP67 for PT1000 Round Head Probe Sensor
• Battery life up till 5 years@25°C, 15mins interval setting
• Easy to deploy and maintain

LoRaWAN Temperature and Humidity Sensor

• LoRaWAN wireless connectivity
• -20 °C to 55 °C temperature detection range
• 0%RH to 90%RH humidity detection range
• Battery life up till 5 years@25 °C, 15 mins interval setting
• Easy to deploy and maintain

3-Phase Current Meter with 3 x 75A Clamp-On CT

• LoRaWAN wireless connectivity
• 3 x 75A Clamp-On CT
• Battery life up till 3.5 years@25 °C, 60 mins interval setting
• Easy to deploy and maintain

mPCIe to dual isolated CANbus 2.0B Module

• Compliant with ISO 11898-2
• Support baud rate 100/125/250/500(default)/800/1000K
• Support CAN message acceptance filter, listen-only mode
• Keep configuration after hardware reboot
• Up to 7,800 frame/s (receiving at 1Mbps, EID, 8byte data)
• Additional driver to support Linux SocketCAN
• Support SAE J1939/CANopen high layer protocol (Optional)
• Termination resistor enabled/disabled by jumper
• Complies with EN61000-4-5 2.5kV Surge protection
• Complies with IEC 60950-1:2005 + A1: 2009 + A2:2013 2.5kV HiPOT protection
• Complaint with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
• Supports 3rd mounting hole and USB Pin header for out-ofminicard installation
• 30μ” golden finger, 3-year warranty
• Industrial Temperature (-40°C to +85°C) support

• 200mm x 100mm x 5mm
• 6W / mK heat conductivity

• Easy to charge M133WK Series Tablets
• User friendly viewing angle with extended I/O interface
• Can be mounted directly to table top
• LAN passthough from Tablet

• VESA Mounting support
• Keeps the tablet securely fastened on moving vehicles
• Easy insert and release with KeyLock
• Wide power voltage input (10~60V DCin)

19" TFT-LCD Open Frame Display Module

• 19" TFT-LCD with Projected Capacitive Touch
• Cincoze Patent CDS Technology Support
• Designed with Adjustable Mounting Bracket
• Support Flat / Standard / VESA / Rack Mount
• Front Panel IP65 Compliant
• Wide Operating Temperature

24" TFT-LCD Sunlight Readable Display Module with Projected Capacitive Touch

• 24" TFT-LCD with Projected Capacitive Touch
• Ultra High Brightness up to 1,500 nits
• Resolution up to 1920 X 1080 (Full HD)
• 50,000 hrs LED Backlight Life
• Wide Range Operating Temperature -20°C to 70°C
• IP 65 Compliant Front Panel
• Flat Rugged Aluminum Die-casting Bezel
• Convertible Display System (CDS) Technology Supported
• Safety: UL, cUL, CB, IEC, EN 62368-1

21.5" TFT-LCD Sunlight Readable Display Module with Projected Capacitive Touch

• 21.5" TFT-LCD with Projected Capacitive Touch
• Brightness up to 1,000 nits
• Resolution up to 1920 x 1080 (Full HD)
• 50,000 hrs LED Backlight Life
• Wide Range Operating Temperature 0°C to 80°C
• IP 65 Compliant Front Panel
• Flat Rugged Aluminum Die-casting Bezel
• Convertible Display System (CDS) Technology Supported
• Safety: UL, cUL, CB, IEC, EN 62368-1

PCIe x16 Dual-port 100G QSFP+ Ethernet Network Adapter(E810)

• Intel master chip scheme
• PCI Express v4.0 x16
• iWARP and RoCEv2 Remote Direct Memory Access (RDMA)
• Intel Ethernet Adaptive Virtual Function
• Enhanced server virtualizations: 256 VFs, 768 VSIs
• IEEE 1588 Precision Time Protocol with per-packet time stamping

4 xU.2 to PCIe x16 Adapter for 2.5

• 4 68-pin SFF-8639 interface connector
• Support Equipment: 4 PCIe U.2 NVMe SSD
• Ps. Motherboards and BIOS Support PCIe Bifurcation required

1U Rackmount Network Appliance support Intel® Gen8 Xeon® E-2378, 4 DDR4 slots, 8 x 2.5GbE , 2 PulM slots , 2 PCIe expansion, Redundant Power

•   Intel® Gen8 Xeon® E-2378
• DDR4 3200MHz ECC/Non-ECC UDIMM , up to 128G
• 8 x 2.5 Gbps RJ-45 LAN ports & 2 pairs LAN bypass
• 2 x Standard PCIe slot (1 x PCIe Gen4 x4, 1 x PCIe Gen4 x8)
• 2 x PulM network module
• 1 x RJ-45 Console, 2 x USB 3.0
• 2 x 2.5” SATA HDD/SSD bay support SATA 3.0 (6 Gbps)
• 300W Redundant Power Supply

PCIe x4 to U.3 NVMe SSD Adapter

• PCIe 4.0 x4 to U.3 NVMe SSD Adapter
• Support：1* U.3 NVMe SSD
• Host Bus Type： PCIe 4.0 x4

1U Rackmount Network Appliance with Intel Ice Lake-D LCC processor

•  Intel® Xeon® D Processor series (Code Name: Ice Lake-D LCC)
• 4 x DDR4 2400M/2933Hz ECC UDIMM/RDIMM, up to 256G
• 8 x 2.5 Gbps RJ-45 LAN ports & 5 x 10 Gbps SFP+ ports
• 1 x FH PCIe Gen4 x8 or 2 x FH PCIe Gen4 x4 and 1 x OCP 3.0 slot
• 1 x RJ-45 Console, 2 x USB 3.0, LCM
• 2 x 2.5” SATA slot, 2 x M.2 M key 2280 (SATA/PCIe Gen3 x2)
• 1 x M.2 B key for IPMI module (support IEI iRIS2 IPMI module)
• 320W Redundant Power Supply

2U Rackmount Network Appliance with Intel® Xeon® Scalable processors

• Dual 4th Gen Intel® Xeon® Scalable processors (Code name: Sapphire Rapids)
• DDR5 4800 MHz ECC RDIMM (up to 4 TB)
• 1 x PCIe Gen 4 x16 FHFL
• 8 x OCP 3.0 slots (6 x PCIe Gen 5 x16, 2 x PCIe Gen 4 x16)
• 2 x 10GbE SFP+ (Intel X710-BM2)
• 2 x 1GbE RJ45 (Intel i350-AM2)
• 1 x GbE RJ45 IPMI management port
• 2 x U.2 slots with Removable Tray (PCIe 4.0 x4)
• 1 x 2280 M-Key (PCIe 4.0 x4)
• Redundant power supply (CRPS)

Industrial 2.5" U.2 SSD, Wide-Temp,  iSLC, iDataGuard, iPowerGuard

• PCIe Gen. 4x4, NVMe 1.4
• Excellent data transfer speed
• Support iSLC technology
• Standard temperature
• iPowerguard
• iDataguard
• LDPC ECC engine supported.
• End-to-end Data Path Protection (ETEP)

Industrial 2.5" U.2 SSD, Wide-Temp,  iSLC, iDataGuard, iPowerGuard

• PCIe Gen. 4x4, NVMe 1.4
• Excellent data transfer speed
• Support iSLC technology
• Standard temperature
• iPowerguard
• iDataguard
• LDPC ECC engine supported.
• End-to-end Data Path Protection (ETEP)

Industrial 2.5" U.2 SSD, Wide-Temp,  iSLC, iDataGuard, iPowerGuard

• PCIe Gen. 4x4, NVMe 1.4
• Excellent data transfer speed
• Support iSLC technology
• Standard temperature
• iPowerguard
• iDataguard
• LDPC ECC engine supported.
• End-to-end Data Path Protection (ETEP)

Industrial 2.5" U.2 SSD, Wide-Temp,  iSLC, iDataGuard, iPowerGuard

• PCIe Gen. 4x4, NVMe 1.4
• Excellent data transfer speed
• Support iSLC technology
• Standard temperature
• iPowerguard
• iDataguard
• LDPC ECC engine supported.
• End-to-end Data Path Protection (ETEP)