Industrial communication

Industrial CAN-to-fiber converters

• Transmits data up to 2 km over optical fiber
• Converts CAN signals to fiber and fiber to CAN signals
• Baudrate up to 1 Mbps
• Dual power inputs for redundancy
• DIP switch for 120 ohm terminal resistance
• DIP switch for fiber test mode
• LEDs for Fiber Tx, Fiber Rx, Power 1, Power 2
• Wide-temperature model available for -40 to 85°C environments
• Fully compatible with the ISO 11898 standard

8-ch Isolated Thermocouple Input Modbus TCP Module with 8-ch DO

• I/O Type: 8 T/C & 8 DO
• 10/100Based-T Ethernet
• Supports multi-channel/multi-range
• Provides default/customized web page
• 2,500 VDC optical isolation

IEEE 802.3af PoE Ethernet-to-fiber media converters

• 10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X
• IEEE 802.3af and PoE standard compliance
• IEEE 802.3at and PoE+ standard compliance (HW Rev. 1.1.0 and later )
• Power failure alarm by relay output
• Supports store-and-forward mode and pass-through mode
• -40 to 75°C operating temperature range (-T model)
• Redundant dual DC power inputs

Industrial Gigabit Ethernet to fiber media converter

• 10/100/1000BaseT(X) and 1000BaseSFP slot supported
• Link Fault Pass-Through (LFPT)
• Power failure, port break alarm by relay output
• Redundant power inputs
• -40 to 75°C operating temperature range (-T models)
• Designed for hazardous locations (Class 1 Div. 2/Zone 2, IECEx)

Industrial serial-to-fiber converters

• 2kV isolation 3-way communication: RS-232, RS-422/485, and fiber
• Rotary switch to change the pull high/low resistor value
• Extends RS-232/422/485 transmission up to 40 km with single-mode or 5 km with multi-mode
• -40 to 85°C wide-temperature range models available
• C1D2, ATEX, and IECEx certified for harsh industrial environments

7+3G-port Gigabit managed Ethernet switches

• 2 Gigabit Ethernet ports for redundant ring and 1 Gigabit Ethernet port for uplink solution
• Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), RSTP/STP, and MSTP for network redundancy
• TACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security
• Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01

Entry-level industrial 10/100BaseT(X)-to-100BaseFX media converters

• Multi-mode or single-mode, with SC or ST fiber connector
• Link Fault Pass-Through (LFPT)
• DIP switches to select FDX/HDX/10/100/Auto/Force