New Arrivals

Industrial U.3 NVMe Enterprise Grade SSD

• Compliant with PCIe Gen4x4 Interface
• Compliance: NVMe 1.4/ PCIe Base 4.0
• 3D TLC NAND Flash (eTLC)
• Capacity: 1920GB ~ 7680GB
• Powerguard Function (Power Loss Protection)
• Support AES 256-bit Encryption
• End-to-End Data Protection
• Dynamic Thermal Throttling
• Heat Dissipation Design on the Case
• Operating as Boot Disk

Industrial U.3 NVMe Enterprise Grade SSD

• Compliant with PCIe Gen4x4 Interface
• Compliance: NVMe 1.4/ PCIe Base 4.0
• 3D TLC NAND Flash (eTLC)
• Capacity: 1920GB ~ 7680GB
• Powerguard Function (Power Loss Protection)
• Support AES 256-bit Encryption
• End-to-End Data Protection
• Dynamic Thermal Throttling
• Heat Dissipation Design on the Case
• Operating as Boot Disk

Fanless Embedded System with Intel® Alder Lake-N Processor, 2 LAN/4 LAN, HDMI, DisplayPort++, 2 COM, 4 USB, and 9 to 36 VDC

• Intel® processor N97 quad-core SoC (Alder Lake-N)
• 1 DDR4 SO-DIMM, up to 32GB
• Operating temperature ranges from -20°C to +60°C
• Supports either two or four 2.5GbE versions
• 4 USB with a power on/off feature and 2 COM
• Supports HDMI (FHD) and DisplayPort++ for dual-view
• Front-access I/O design

Fanless Embedded System, Intel 12th Gen i5 CPU, DP & HDMI, 6x GbE LAN (4x PoE), 6x USB, COM

• Intel® Core™ i5-1235U processor (10-Core, 4.4 Ghz)
• 2.5" SATA SSD bay
• Support M.2 NVME SSD
• HDMI & DisplayPort display
• 120W power adapter for more power hungry applications
• 3x USB3.1, 3x USB2.0
• 2x GbE LAN, RJ-45
• 4x GbE PoE Port LAN, RJ-45
• COM Port with RJ45 connector

Wi-fi 7 enterprise Access Point mPCIe card

• Qualcomm QCN9274 chipset
• Dual diplexer setup enables 2x2+2x2 data streams on the 2.4 and 5 GHz bands concurrently with only 2 antennas

Wi-fi 6 enterprise Access Point mPCIe card

• 192-bit WPA3 enterprise encryption
• Hotspot 2.0 and Wi-Fi Direct
• Renesas Celeno, CL8040 chipset
• Support up to 128 clients

Fanless Embedded System, Intel 12th Gen i5 CPU, 3x HDMI, 3x 2.5GbE LAN, 4x USB, 2x COM

• 12th Gen Core-i CPU, i5-1235U Ultra Low Voltage
• 2.5" SATA SSD bay
• Support M.2 NVME SSD
• Triple HDMI display
• 90W power adapter for more power hungry applications
• 4x USB3.1, 2x USB2.0
• 3x 2.5GbE LAN, RJ-45
• 2x COM RS-232/485

Fanless Embedded System, Intel N100 (4-Core) CPU, 2x HDMI, 2x 2.5Gb LAN, 6x USB, 2x COM, 9-36V DC

• Onboard Intel Alder Lake-N N100 CPU (6W)
• Dual monitor support (2x HDMI)
• 2x 2.5G LAN (Intel i225-V)
• 4G LTE & WLAN support
• Small size, Fanless system (150 x 127 x 48mm)

LoRaWAN Gateway Module

• Latest Semtech SX1302 gateway chipset solution
• Long-range wide area IoT gateway
• Support embedded LNS software for linux-based OS
• LoRaWAN protocol for both private and public system application
• Standard mini-PCIe form factor
• Global LoRaWAN Frequency Plans

Industrial LoRaWAN Gateway

• Latest Semtech SX1302 gateway chipset solution, it doubles the packet processing speed
• Embedded LoRaWAN Network Server for both private and public system application
• Compatible with Multiple Network Servers like Actility, The Things Network, Chirpstack, AWS, etc
• Supports Modbus/TCP, MQTT, BacNet, OPCUA protocols
• Build-in Node-Red, LoRaWAN network server and Edgelink software packages
• Global LoRaWAN Frequency Plans
• DIN rail and wall mounting design
• Backhaul 4G (by additional adapter)

LoRaWAN Smart Vibration Sensor

• LoRaWAN wireless connectivity
• Built-in 3-axis accelerometer and temperature sensor
• On-board computing. Directly sends VRMS, ARMS, Peak, Displacement, Kurtosis, Crest factor, Skewness and Standard Deviation values to applications
• Support battery power supply, no wiring installation needed
• Easy settings with user friendly interfaces on WISE Studio utility
• ISO 10816-1 compliant
• Support wide temperature -20 ~ 80 °C (Battery-powered)
• IP66 enclosure design

LoRaWAN Wireless Water Leakage Sensor

• LoRaWAN wireless connectivity
• 3.5mm water line diameter
• Battery life up till 5 years@25 °C, 15 mins interval setting
• Easy to deploy and maintain

LoRaWAN Temperature PT1000 Round Head Probe Sensor

• LoRaWAN wireless connectivity
• -70°C to 200°C temperature detection range
• IP67 for PT1000 Round Head Probe Sensor
• Battery life up till 5 years@25°C, 15mins interval setting
• Easy to deploy and maintain

LoRaWAN Temperature and Humidity Sensor

• LoRaWAN wireless connectivity
• -20 °C to 55 °C temperature detection range
• 0%RH to 90%RH humidity detection range
• Battery life up till 5 years@25 °C, 15 mins interval setting
• Easy to deploy and maintain

3-Phase Current Meter with 3 x 75A Clamp-On CT

• LoRaWAN wireless connectivity
• 3 x 75A Clamp-On CT
• Battery life up till 3.5 years@25 °C, 60 mins interval setting
• Easy to deploy and maintain

8-port RS-232 USB-to-serial converters

• USB 3.2 SuperSpeed capability
• 512-byte on-chip FIFO cache and flow control for enhanced performance
• Drivers provided for a broad selection of operating systems, including Windows and Linux
• 50 bps to 921.6 kbps baudrate (nonstandard baudrates supported)
• Double-sided LEDs located at the corners show power, TX, and RX statuses in either directions
• Cascades with 3 UPort-G2 devices to up port capacity to 32 ports; no additional power adaptors required (UPort 1650-8-G2-Hub)
• Latching USB cable design for firmer connection
• Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments
• Serial port with 2 kV isolation protection (for “-I” models)

8-port RS-232/422/485 USB-to-serial converters

• USB 3.2 SuperSpeed capability
• 512-byte on-chip FIFO cache and flow control for enhanced performance
• Drivers provided for a broad selection of operating systems, including Windows and Linux
• 50 bps to 921.6 kbps baudrate (nonstandard baudrates supported)
• Double-sided LEDs located at the corners show power, TX, and RX statuses in either directions
• Cascades with 3 UPort-G2 devices to up port capacity to 32 ports; no additional power adaptors required (UPort 1650-8-G2-Hub)
• Latching USB cable design for firmer connection
• Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments
• Serial port with 2 kV isolation protection (for “-I” models)

4-port RS-232 USB-to-serial converters

• USB 3.2 SuperSpeed capability
• 512-byte on-chip FIFO cache and flow control for enhanced performance
• Drivers provided for a broad selection of operating systems, including Windows and Linux
• 50 bps to 921.6 kbps baudrate (nonstandard baudrates supported)
• Double-sided LEDs located at the corners show power, TX, and RX statuses in either directions
• Latching USB cable design for firmer connection
• Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments
• Serial port with 2 kV isolation protection (for “-I” models)

4-port RS-232/422/485 USB-to-serial converters

• USB 3.2 SuperSpeed capability
• 512-byte on-chip FIFO cache and flow control for enhanced performance
• Drivers provided for a broad selection of operating systems, including Windows and Linux
• 50 bps to 921.6 kbps baudrate (nonstandard baudrates supported)
• Double-sided LEDs located at the corners show power, TX, and RX statuses in either directions
• Latching USB cable design for firmer connection
• Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments
• Serial port with 2 kV isolation protection (for “-I” models)

2-port RS-232/422/485 USB-to-serial converters

• USB 3.2 SuperSpeed capability
• 50 bps to 921.6 kbps baudrate (nonstandard baudrates supported)
• 512-byte on-chip FIFO cache and flow control for enhanced performance
• Double-sided LEDs located at the corners show power, TX, and RX statuses in either directions
• Drivers provided for a broad selection of operating systems, including Windows and Linux
• Latching USB cable design for firmer connection
• Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments
• Serial port with 2 kV isolation protection (for “-I” models)