New Arrivals

Elo 2770L 27-inch wide LCD Monitor, Full HD, Projected Capacitive 10-touch, USB Controller, Clear, Zero-bezel, Collapsible Stand, VGA, DP and HDMI video interface, Black

M.2 2242 to Four RS-232 Module, Vertical Connector / Wide Temperature

• 4800bps to 921.6Kbps serial data rate
• PCI Express base spec 1.1 compliant
• Compatible with 16C550 / 16C650 / 16C750 / 16C850 / 16C950, 128-byte FIFOs
• Full RS-232 functions with DB9 connector
• Alternative vertical or horizontal connector
• Complies with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
• Operating temperature from -40°C to 85°C

M.2 2280 (B+M key) 2-port 1GbE SFP Ethernet board (-40℃~+85℃)

• Single-Lane (x1) PCI-Express with throughput up to 5.0/2.5GT/s
• Standard SFP modules supporting data rates of up to 1Gbps
• IEEE 802.3 for 1000Base-SX/1000Base-LX, IEEE 802.3ap for 1000Base-KX, PICMG 3.1 for 1000Base-BX
• Support Wake-on-LAN and Hot-Swap function
• Allowing for long-distance communication and easy upgrades
• Modular Design, flexibility and scalability
• Support multiple SFP ports, both single-mode or multi-mode

M.2 2280 (B+M key) 1-port 1GbE SFP Ethernet board (-40℃~+85℃)

• Single-Lane (x1) PCI-Express with throughput up to 5.0/2.5GT/s
• Standard SFP modules supporting data rates of up to 1Gbps
• IEEE 802.3 for 1000Base-SX/1000Base-LX, IEEE 802.3ap for 1000Base-KX, PICMG 3.1 for 1000Base-BX
• Support Wake-on-LAN and Hot-Swap function
• Allowing for long-distance communication and easy upgrades
• Modular Design, flexibility and scalability
• Support multiple SFP ports, both single-mode or multi-mode

M.2 2230 (A+E key) 1 port 2.5GbE isolated Ethernet board (-40℃~+85℃)

M.2 2242/2260/2280 2-port RS-232 serial board with power input

• Single-Lane (x1) PCI-Express with throughput up to 5.0 / 2.5Gbps
• Fully compliant with PCI-Express Base Specification Rev. 2.0
• Top serial transmission performance up to 921.6 Kbps baud rate
• FIFO 256 Bytes, 15 KV ESD protections on board
• H/W, S/W automate flow control supported
• Each port supports 5V or 12V power output by jumper setting

M.2 2242/2260/2280 2-port RS-232/422/485 isolated serial board

• Single-Lane (x1) PCI-Express with throughput up to 5.0 / 2.5Gbps
• Fully compliant with PCI-Express Base Specification Rev. 2.0
• Top serial transmission performance up to 921.6 Kbps baud rate
• FIFO 256 Bytes, 15 KV ESD protections on board
• H/W, S/W automate flow control supported
• RS-232/422/485 mode selectable by DIP switch setting
• Support port to computer isolation 2.5kV

M.2 2242 (USB HS) to Single Isolated CAN FD

• Baud rate up to 5 / 10 / 20 / 50 / 100 / 125 / 250 / 500 (default) / 800 / 1000K
• Data rate up to 2 / 4 / 5Mbps (For more details, refer to *Notes in the specification table below)
• CAN 2.0 up to 7,800 frame/s (RX baud rate 1M, EID, 8byte data)
• CAN FD up to 6,000 frame/s (RX baud rate 1M, data rate 5M, EID, 64byte data)

Fanless Edge AI System with NVIDIA® Jetson Orin™ NX Super, 1 HDMI, 1 GbE LAN, 4 GbE PoE, 4 USB, 2 COM/CAN, 8-CH DIO, and 8-CH GMSL for AMR & Robotics

• NVIDIA® Jetson Orin™ NX Super (Up to 157 TOPS)
• Supports Super Mode with Jetpack 6.2 and above
• Seamless connectivity with 5G, Wi-Fi, and GbE combined
• Effortless management with USB and PoE device power control
• Supports 4 USB and 4 PoE for camera and sensor connectivity
• Enables 24/7 secure remote monitoring, control, and OTA deployment, powered by Allxon
• Supports the NVIDIA Isaac™ Robot Operating System (ROS) SDK for AI-powered robot development

3.5” Embedded SBC with LGA1700 Socket 13th/12th Gen Intel® Core™ i7/i5/i3, Celeron® Processor, DisplayPort in USB Type-C®, HDMI, eDP, GbE LAN, and 2.5GbE LAN

• LGA1700 socket 13th/12th gen Intel® Core™ i7/i5/i3, Celeron® processor
• 2 DDR5 SO-DIMM for up to 64GB of memory
• GbE LAN and 2.5GbE LAN ports
• 3 M.2 expansion slots

IP67-rated Industrial System with LGA1700 Socket 14th/13th/12th Gen Intel® Core™ i9/i7/i5/i3 or Celeron® Processor, Intel® H610E, and Front-access I/O

• M12 connectors and IP67 housing
• Optional I/O for expansion
• Intelligent power management: Ignition, and USB power on/off control
• EN 61000-6-2 certified

Industrial Multi-GNSS (GPS, GLONASS, BeiDou, Galileo, QZSS and SBAS) module with M.2 2242 B Key form factor

• M.2 2242 Key B form factor
• 92 channel support u-blox NEO-M9N engine (GPS, GLONASS, BeiDou, Galileo, QZSS andSBAS)
• Open sky cold start 24 second / Aided starts 2 second
• USB 2.0 communication interface
• Accuracy 1.5m CEP
• Operating temperature: -40°C ~ +85°C

Industrial Multi-GNSS (GPS, GLONASS, BeiDou, Galileo, QZSS and SBAS) module with half size mini-PCIe form factor

• 92 Channels u-blox NEO-M9 engine (GPS, GLONASS, BeiDou, Galileo, QZSS and SBAS)
• Untethered Dead Reckoning(UDR)
• Including IMU and Oscillator
• 2 second TTFF for Hot Starts, Open sky code start 24 second.
• Accuracy SBAS 1.5M CEP
• Operating temperature: -40 to +85° C

PCIe to Four Isolated CAN FD Module

• Baud rate up to 5 / 10 / 20 / 50 / 100 / 125 / 250 / 500 (default) / 800 / 1000K
• CAN2.0 up to 7,800 frame/s (RX baud rate 1M, EID, 8byte data)
• CANFD up to 6,000 frame/s (RX baud rate 1M, data rate 5M, EID, 64byte data) 
• Data rate supports 2 / 4 / 5Mbps
• Complies with IEC 60950-1 : 2005 + A1 : 2009 + A2 : 2013 2.5kV HiPOT protection
• Complaint with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
• Termination resistor enabled / disabled by jumper
• Optional M.2 slot to expand 2 ~ 4 more CAN ports by installing EGUC series

PCIe to Dual Isolated CAN FD Module

• Baud rate up to 5 / 10 / 20 / 50 / 100 / 125 / 250 / 500 (default) / 800 / 1000K
• CAN2.0 up to 7,800 frame/s (RX baud rate 1M, EID, 8byte data)
• CANFD up to 6,000 frame/s (RX baud rate 1M, data rate 5M, EID, 64byte data) 
• Data rate supports 2 / 4 / 5Mbps
• Complies with IEC 60950-1 : 2005 + A1 : 2009 + A2 : 2013 2.5kV HiPOT protection
• Complaint with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
• Termination resistor enabled / disabled by jumper
• Optional M.2 slot to expand 2 ~ 4 more CAN ports by installing EGUC series

M.2 2280 2 port USB 3.2 board with Type-C cable

• Dual-Lane (x2) PCI-Express with throughput to 5.0/2.5 GT/s
• Fully compliant with PCI-Express Base Specification Rev.2.0
• Support simultaneous operation of multiple USB 1.1, USB 2.0, and USB 3.2 GEN1x1 devices
• Support individual two USB devices running 5Gbps at full speed
• USB data transfer rate of 1.5/12/480/5000 Mbps 
• With Type-C cable

21.5" FHD TFT IP66-rated Stainless Steel Fanless PCT Panel Computer with Intel® Core™ i5-1335UE or Processor U300E and Flat Bezel Design (-20°C to +50°C)

• 21.5" FHD TFT flat bezel LCD display
• Fanless design with Intel® Core™ i5-1335UE
• Full Stainless SUS304 enclosure with IP66 & IP69K
• Supports vertical installation with 90° rotated I/O
• Supports proximity and light sensors
• EC control (backlight on/off, brightness, light sensor, touch on/off, and Super I/O)
• Intelligent power management solution (Smart Ignition)
• Programmable OSD function key
• Operating temperature: -20°C to +50°C

12.3" 350 cd/m² 1920 x 720 monitor, VGA, HDMI, DisplayPort, USB PC touch screen, 9 ~36V DC input, Speaker

• Front OSD, easy access for setting adjustment
• IP65 compliant front panel with aluminum frame
• Anti-glare and anti-UV PCAP
• Speakers positioned at the front, ensuring clear sound delivery even in panel mount
• Supports gloved operation and waterproof protection

12.3" 350 cd/m² 1920 x 720 monitor, VGA, HDMI, DisplayPort, with USB 3.0 HUB, USB PC touch screen, 9 ~36V DC input, Speaker, Camera

• Front OSD, easy access for setting adjustment
• Built-in camera, ideal for AI facial recognition
• USB 3.2 Gen1 Type-A supports 10W
• IP65 compliant front panel with aluminum frame
• Anti-glare and anti-UV PCAP
• Speakers positioned at the front, ensuring clear sound delivery even in panel mount
• Supports gloved operation and waterproof protection