New Arrivals

8-port RS-232 USB-to-serial converters

• USB 3.2 SuperSpeed capability
• 512-byte on-chip FIFO cache and flow control for enhanced performance
• Drivers provided for a broad selection of operating systems, including Windows and Linux
• 50 bps to 921.6 kbps baudrate (nonstandard baudrates supported)
• Double-sided LEDs located at the corners show power, TX, and RX statuses in either directions
• Cascades with 3 UPort-G2 devices to up port capacity to 32 ports; no additional power adaptors required (UPort 1650-8-G2-Hub)
• Latching USB cable design for firmer connection
• Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments
• Serial port with 2 kV isolation protection (for “-I” models)

8-port RS-232/422/485 USB-to-serial converters

• USB 3.2 SuperSpeed capability
• 512-byte on-chip FIFO cache and flow control for enhanced performance
• Drivers provided for a broad selection of operating systems, including Windows and Linux
• 50 bps to 921.6 kbps baudrate (nonstandard baudrates supported)
• Double-sided LEDs located at the corners show power, TX, and RX statuses in either directions
• Cascades with 3 UPort-G2 devices to up port capacity to 32 ports; no additional power adaptors required (UPort 1650-8-G2-Hub)
• Latching USB cable design for firmer connection
• Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments
• Serial port with 2 kV isolation protection (for “-I” models)

4-port RS-232 USB-to-serial converters

• USB 3.2 SuperSpeed capability
• 512-byte on-chip FIFO cache and flow control for enhanced performance
• Drivers provided for a broad selection of operating systems, including Windows and Linux
• 50 bps to 921.6 kbps baudrate (nonstandard baudrates supported)
• Double-sided LEDs located at the corners show power, TX, and RX statuses in either directions
• Latching USB cable design for firmer connection
• Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments
• Serial port with 2 kV isolation protection (for “-I” models)

4-port RS-232/422/485 USB-to-serial converters

• USB 3.2 SuperSpeed capability
• 512-byte on-chip FIFO cache and flow control for enhanced performance
• Drivers provided for a broad selection of operating systems, including Windows and Linux
• 50 bps to 921.6 kbps baudrate (nonstandard baudrates supported)
• Double-sided LEDs located at the corners show power, TX, and RX statuses in either directions
• Latching USB cable design for firmer connection
• Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments
• Serial port with 2 kV isolation protection (for “-I” models)

2-port RS-232/422/485 USB-to-serial converters

• USB 3.2 SuperSpeed capability
• 50 bps to 921.6 kbps baudrate (nonstandard baudrates supported)
• 512-byte on-chip FIFO cache and flow control for enhanced performance
• Double-sided LEDs located at the corners show power, TX, and RX statuses in either directions
• Drivers provided for a broad selection of operating systems, including Windows and Linux
• Latching USB cable design for firmer connection
• Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments
• Serial port with 2 kV isolation protection (for “-I” models)

7 -port general-purpose USB 3.2 hub

• USB-IF certification
• USB 3.2 SuperSpeed capability
• Latching USB cable design for firmer connection
• Comprehensive diagnostic LEDs
• Dual power inputs (power jack and terminal block)
• DIN-rail housing and wall-mountable housing
• Rugged metal housing

4 -port general-purpose USB 3.2 hub

• USB-IF certification
• USB 3.2 SuperSpeed capability
• Latching USB cable design for firmer connection
• Comprehensive diagnostic LEDs
• Dual power inputs (power jack and terminal block)
• DIN-rail housing and wall-mountable housing
• Rugged metal housing

7 -port general-purpose USB 3.2 hub

• USB-IF certification
• USB 3.2 SuperSpeed capability
• IP30 aluminum housing
• DIN-rail housing and wall-mountable housing

4 -port general-purpose USB 3.2 hub

• USB-IF certification
• USB 3.2 SuperSpeed capability
• IP30 aluminum housing
• DIN-rail housing and wall-mountable housing

12G-port full Gigabit managed Ethernet switches with an 8 802.3bt PoE port option

• Developed according to the IEC 62443-4-1 and compliant with the IEC 62443-4-2 industrial cybersecurity standards
• Support for IEEE 802.3bt PoE for up to 90 W output per port
• Increased bandwidth capabilities with fiber SFP slots supporting up to 2.5 Gbps
• Turbo Ring and Turbo Chain (recovery time < 50 ms @ 250 switches), and RSTP/STP for network redundancy
• Wide range of power input options for flexible deployment
• Compact and flexible housing design to fit into confined spaces
• Supports MXstudio for easy, visualized industrial network management

8+4G-port managed Ethernet switches with an 8 802.3bt PoE port option

• Developed according to the IEC 62443-4-1 and compliant with the IEC 62443-4-2 industrial cybersecurity standards
• Support for IEEE 802.3bt PoE for up to 90 W output per port
• Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches) , and RSTP/STP for network redundancy
• Wide range of power input options for flexible deployment
• Compact and flexible housing design to fit into confined spaces
• Supports MXstudio for easy, visualized industrial network management

8-port managed Ethernet switches with options of 4 802.3bt PoE ports or 4 Gigabit uplink ports

• Developed according to the IEC 62443-4-1 and compliant with the IEC 62443-4-2 industrial cybersecurity standards
• Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches) , and RSTP/STP for network redundancy
• Support for IEEE 802.3bt PoE for up to 90 W output per port
• Wide range of power input options for flexible deployment
• Compact and flexible housing design to fit into confined spaces
• Supports MXstudio for easy, visualized industrial network management

mPCIe to dual isolated CANbus 2.0B Module

• Compliant with ISO 11898-2
• Support baud rate 100/125/250/500(default)/800/1000K
• Support CAN message acceptance filter, listen-only mode
• Keep configuration after hardware reboot
• Up to 7,800 frame/s (receiving at 1Mbps, EID, 8byte data)
• Additional driver to support Linux SocketCAN
• Support SAE J1939/CANopen high layer protocol (Optional)
• Termination resistor enabled/disabled by jumper
• Complies with EN61000-4-5 2.5kV Surge protection
• Complies with IEC 60950-1:2005 + A1: 2009 + A2:2013 2.5kV HiPOT protection
• Complaint with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
• Supports 3rd mounting hole and USB Pin header for out-ofminicard installation
• 30μ” golden finger, 3-year warranty
• Industrial Temperature (-40°C to +85°C) support

15.6" FHD Fanless Touch Panel Computer with LGA1700 Socket 13th/12th Gen Intel® Core™ i7/i5/i3 or Pentium® Processor

• 15.6" FHD LCD with 450 nits of brightness
• Projected capacitive touch
• Supports one 2.5” SATA HDD/SSD
• Flat front panel touch screen with rugged IP65 front bezel
• Fanless design
• Supports WLAN module and antenna (optional)
• Supports 4 USB and 2 COM ports
• TPM 2.0 onboard
• Swappable HDD tray
• Supports panel mount, VESA mount, desktop stand, and wall mount

21.5" FHD Fanless Touch Panel Computer with LGA1700 Socket 13th/12th Gen Intel® Core™ i7/i5/i3 or Pentium® Processor

• 21.5" FHD TFT LCD with 400 nits of brightness
• 10-point PCAP multi-touch panel
• Supports one 2.5” SATA HDD/SSD
• Supports 2 HDMI outputs for 2nd display
• Supports WLAN module and antenna (optional)
• Supports 4 USB and 2 COM ports
• Flexible I/O window with support for COM3, and DIO (optional)
• Supports panel mount, VESA mount, desktop stand, and wall mount
• Wide temperature range of -10 to +50°C

• Industrial-grade 18.5" LCD panel with 50k backlight lifetime
• True-flat touchscreen with multi-touch projected capacitive control
• High-performance, fanless 11th generation Intel® Core™ i processor
• Dual channel memory slots, max 64G
• Compact, fanless design with aluminum alloy enclosure
• IP66-rated front panel
• Supports dual displays (1 x external HDMI)
• 1 x M.2 bay (2242/2280 NVME or SATA Interface) for storage and support SATA RAID 0, 1
• Support TPM2.0 hardware security

• Industrial-grade 21.5" LCD panel with 50k backlight lifetime
• True-flat touchscreen with multi-touch projected capacitive control
• High-performance, fanless 11th generation Intel® Core™ i processor
• Dual channel memory slots, max 64G
• Compact, fanless design with aluminum alloy enclosure
• IP66-rated front panel
• Supports dual displays (1 x external HDMI)
• 1 x M.2 bay (2242/2280 NVME or SATA Interface) for storage and support SATA RAID 0, 1
• Support TPM2.0 hardware security

  23.8" Fanless Panel PC with Intel® Core™ i5 Processor

• Industrial-grade 23.8" LCD panel with 30k backlight lifetime
• True-flat touchscreen with multi-touch projected capacitive control
• High-performance, fanless 11th generation Intel® Core™ i processor
• Dual channel memory slots, max 64G
• Compact, fanless design with aluminum alloy enclosure
• IP66-rated front panel
• Supports dual displays (1 x external HDMI)
• 1 x M.2 bay (2242/2280 NVME or SATA Interface) for storage and support SATA RAID 0, 1
• 1 x 2500BASE-T Ethernet Supports Time-Sensitive Network(TSN) technology

12.1" Fanless Panel PC with Intel® Celeron® N6210 Processor

• Industrial-grade 12" XGA TFT LCD with 30K backlight lifetime
• Durable true-flat touchscreen with 5-wire resistive/projected capacitive touch control
• Intel® Celeron® J6412 quad-core, 2.0 GHz, processor
• Up to 32 GB DDR4 SDRAM
• 1 x RS-232, 1 x RS-232/422/485, 2 x USB 2.0, and 2 x USB 3.1
• Compact, fanless design with solid aluminum alloy enclosure and IP66-rated front panel
• Supports E-key for wireless module
• Supports expansion via M.2 slot
• Supports Windows Embedded Linux and Android OS

10.4" Fanless Panel PC with Intel® Celeron® N6210 Processor

• Industrial-grade 10.4" XGA TFT LCD with 30K backlight lifetime
• Durable true-flat touchscreen with 5-wire resistive/projected capacitive touch control
• Intel® Celeron® J6412 quad-core, 2.0 GHz, processor
• Up to 32 GB DDR4 SDRAM
• 1 x RS-232, 1 x RS-232/422/485, 2 x USB 2.0, and 2 x USB 3.1
• Compact, fanless design with solid aluminum alloy enclosure and IP66-rated front panel
• Supports E-key for wireless module
• Supports expansion via M.2 slot
• Supports Windows Embedded Linux and Android OS