PEAK 870VL2

The PEAK 870VL2 with Intel Core 2 Duo technology and PCI Express LAN offer a great solution
for advanced industrial application that require superb display and processing performance.

Featuring Intel 945G and ICH7R chipsets, the PEAK 870VL2 supports socket LGA775 of Intel
Pentium 4/Pentium D/Celeron D processor with 533/800/1066 MHz FSB supporting speeds up to
3.8 GHz and Hyper-Threading technology.

The Intel 945G supports dual channel non-ECC DDR2 533/667 MHz memory up to 2 GB maximum in
two DIMM slots and an integrated graphics controller.

NEXCOM offers the following 2U and 4U backplanes that support the PICMG 1.3 specification:
* 2U Backplane: NBP 2U220 / NBP 2U040
* 4U Backplane: NBP 14570 / NBP 14111 / NBP 14210

Please do not hesitate to contact us with any question or concern you may have and we
would be happy to assist you.

CPU Support

* Support Intel LGA775 Core 2 Duo / Pentium 4 / Pentium D / Celeron D processors
* Intel Embedded Processor List (Intel Longevity CPU):
- Intel Core 2 Duo Processor E6400 & E4300
- Intel Pentium 4 Processor 651 & 551
- Intel Celeron D Processor 352 & 341
- Intel Celeron Processor 440
* 533/800/1066 MHz FSB support

Main Memory

* 2 x 240-pin DIMM, for up to 2 GB dual channel Non-ECC DDR2 533/667 SDRAM

Chipset

* Intel 945G + ICH7R chipset

BIOS

* Award System BIOS
* Plug & Play support
* Advanced Power Management and Advanced Configuration & Power Interface support
* On-board LAN:
- 2 x Intel 82573L PCIe Gigabit Ethernet Controllers
- Supports Boot from LAN

Display

* Intel 945G GMCH Integrated Intel GMA 950, Max 128 MB of DVMT for
graphics memory allocation
* Analog display support up to 2048 x 1536 @ 85 Hz for CRT

Audio

* AC 97 Audio Codec, Realtek ALC655
* 3 x (1x4 pin header) for Line in /Line out /MIC in

Watchdog Timer

* 1-minute increments from 1 to 255 minutes
* 1-second increments from 1 to 255 seconds
* On-board RTC
* On-chip RTC with battery backup
* 1 x External Li-lon battery

I/O Interface

* USB 2.0: 8 ports (4 on board, 4 to backplane), bandwidth: 480 Mb/s
* Serial port: 2 port, with 2x5pin headers (COM 2 support RS232/RS422/RS485)
* IDE: 1 x 40-pin connector. Support Ultra ATA 100/66/33
* Disk on Module: 1 x 2-pin power connector for DOM
* SATA HDD: 4 ports, Support RAID 0.1
* Parallel port: 1 x 26-pin connector
* Floppy: 1 x 34-pin connector
* GPIO: Supports 4 sets general purpose I/O each with TTL level (5 V) interface
* On-board buzzer / 2-pin power on button switch
* SMBus 2.0 (2-pin header) to backplane
* On-board 2-pin header for reset / 4-pin for speaker
* 5-pin for key lock/power LED / HDD Power LED
* 1 x 4-pin fan connector (for CPU); 2 x 3-pin fan connector (for System)
* 1 x 5-pin JST connector for chassis or backplane front Keyboard/Mouse
* I/O On SBC Bracket
- 1 x VGA DB-15 connector
- 2 x RJ45 Gigabit Ethernet LAN port
- 1 x PS/2 Keyboard/Mouse

System Monitor

* 8 voltages (For +1.5 V, +3.3 V, +5 V, -5 V, +12 V, -12 V, Vcore and +5 Vsb)
* 2 temperature
* 3 fan speed monitors

Dimensions

* PICMG 1.3 SHB
* 338.58 mm (L) x 126.39 mm (W)

Power Input

* Power source from backplane through golden finger
* Supports both ATX or BTX power supplies
* 4-pin +12 V power input connector

Environment

* Board level operating temperature: 0°C to 60°C
* Storage temperature: -20°C to 80°C
* Relative humidity: 10% to 90% (Non-condensing)

For more information see datasheet.