Toggle Nav

PEAK 8920VL2

Lead time 14-22 days
1,382.29EUR 1,114.75EUR
Excellent 3D graphics handling and the industrial graded high performance.
PEAK 8920VL2 PICMG 1.3 Full-Size SHB Express (System Host Board).

Supports LGA771 dual-core Intel Xeon Processor 5100 series with 4 MB L2 cache and the Intel Core
micro architecture up to 2.33 GHz with 1333 MHz FSB.

Featuring an Intel 5000P Chipset + Intel ESB2, the PEAK 8920VL2 delivers higher throughput with
dual point-to-point system buses, faster memory for I/O bandwidth, and Fully Buffered
DIMM (FB-DIMM) support.

The SBC PEAK 8920VL2 is successor to flagship PEAK 7220, which complied with PICMG 1.3 to
ensure easy configuration, highest quality standard, and seamless compatibility with products
from other manufactures.

With the excellent 3D graphics handling, the industrial graded high performance PEAK 8920 is
suitable to configure for medical and gaming.

Main features:

* Quad Core/Dual-Core Xeon Processor SBC
* Intel 5000P Embedded Chipset with Longevity Support
* Robust Mechanism Design for Enhanced Product Reliability
* Up to 8 GB ECC/Register FB-DIMM DDR 2 Memory
* Dual PCI Express Gigabit Ethernet for High Networking Bandwidth
* Four USB 2.0 Directly Output from Bracket to Save the Cabling Cost
* Flexible Design for Single/Dual Processors
* Dedicated CPU Cooler Design for Thermal Solution

Please do not hesitate to contact us with any question or concern you may have and we
would be happy to assist you.
CPU Support

* Support Dual-Core Intel Xeon processor 5100 series and Quad-Core Intel Xeon Processor 5300 series
* Intel Embedded Processor List (Intel Longevity CPU):
- Dual-Core Intel Xeon Processor (5130 & 5140)
- Dual-Core Intel Xeon Processor LV (5128, 5138, 5148) 1066/1333 MHz FSB support

Main Memory

* 4 x 240-pin four channel DDR 2 FB-DIMM
* Support ECC/Register DDR2 memory up to 8GB


* Intel 5000P memory controller Hub
* Intel 6321ESB I/O controller Hub


* Plug & Play support
* 8M-bit flash ROM
* Support Soft off, Wake on LAN, Power On by PS2 Keyboard Function Key, RTC alarm Power On
* Power on after power failure

On-board LAN

* 2 x Intel 82573L PCI Express Gigabit Ethernet
* Support Boot From LAN (PXE)
* Support Wake On LAN (When 5Vsb power available)
* 2 x RJ45 with LED


* ATI ES1000 PCI graphic Controller
* 32MB DDR2 SDRAM VGA Memory
* 1 x DB15 VGA port

I/O Interface

* USB 2.0: 4 ports through I/O bracket
* USB 2.0: 2 ports, with 1x6 JST (2.5mm)
* Serial port: 2 ports, with 2x5 box-header (2.0mm) support RS-232 only
* Parallel port: 1 port , with 2x13 box-header (2.0mm), Bi-directional, EPP/ECP
* PS/2: 1 x Mini-Din Keyboard/Mouse
* GPIO: Support 4 sets of general purpose I/O each with TTL level (5V) interface
* FAN: 2 x 4-pin FAN connectors (for CPU coolers)
* 1 x on board buzzer
* 1 x 2-pin power on switch
* 1 x SMBus 2.0 to Backplane
* 1 x 2-pin header for reset
* 1 x 5-pin header for key lock
* 1 x 2-pin header for power LED
* 1 x 2-pin header for HDD LED


* SATA: 2 ports, support RAID 0,1 through Backplane
* IDE: 1 x 40-pin IDE connector, support Ultra ATA 33/66/100
* 1 x 2-pin JST (2.5mm) power connector for DOM (Disk On Module)

System Monitor

* 8 voltage (For +3.3V, +5V, Vcore x2, 1.8V, 1.5V, 5Vsb, and Vbattery)
* 3 temperature (For 2 CPU and system)
* 3 FAN speed monitor ( 2 for CPU and 1 for ESB2)

Watchdog Timer

* Watchdog Timer is programmable by software from 0 to 255 seconds

On-board RTC

* On-chip RTC with battery back up
* 1 x External Li-Lon battery

Power Input

* Power source from backplane through PICMG 1.3 Golden Finger, support ATX mode


* 338.58 mm (L) x 126.39 mm (W)


* Operating Temperature: 0°C ~ 60°C (for Board Level Only)
* Storage Temperature: -20˚C to 85˚C
* Relative Humidity:
- Operating: 10%~90% (non-condensing)
- Non-Operating: 5%~95% (non-condensing)

For more information see datasheet.