PC Components

PCI- e low profile 8 port USB3.2 board

• Quad-Lane (x4) PCI-Express with throughput up to 5.0/2.5GT/s
• 8-port USB 3.2 PCI Express Card with 4 independent host controllers
• 900 mA/1500 mA max. per port configurable via switch settings
• Support Hot-Swap function
• Support individual four USB devices running 5Gbps at full speed
• Support simultaneous operation of multiple USB 1.1, USB 2.0, and USB 3.2 GEN1x1 devices
• USB data transfer rate of 1.5/ 12/ 480/ 5000 Mbps
• With Type-C cable

PCI- e low profile 8 port USB3.2 board

• Quad-Lane (x4) PCI-Express with throughput up to 5.0/2.5GT/s
• 8-port USB 3.2 PCI Express Card with 4 independent host controllers
• 900 mA/1500 mA max. per port configurable via switch settings
• Support Hot-Swap function
• Support individual four USB devices running 5Gbps at full speed
• Support simultaneous operation of multiple USB 1.1, USB 2.0, and USB 3.2 GEN1x1 devices
• USB data transfer rate of 1.5/ 12/ 480/ 5000 Mbps

PCI- e low profile 8 port USB3.2 board

• Quad-Lane (x4) PCI-Express with throughput up to 5.0/2.5GT/s
• 4-port USB 3.2 PCI Express Card with 4 independent host controllers
• 900 mA/1500 mA max. per port configurable via switch settings
• Support Hot-Swap function
• Support individual four USB devices running 5Gbps at full speed
• Support simultaneous operation of multiple USB 1.1, USB 2.0, and USB 3.2 GEN1x1 devices
• USB data transfer rate of 1.5/ 12/ 480/ 5000 Mbps

Industrial M.2 2230 Embedded Module, B+M Key

• Compliant with PCIe Gen3x2 interface
• Compliance: NVMe 1.3/ PCI Express Base 3.1
• 3D TLC flash memory
• Capacity: 64GB/ 128GB/ 512GB
• End-to-End data protection
• SLC write cache technology
• Thermal throttling technology
• Operating as boot disk
• Static and dynamic wear leveling
• Bad block management
• S.M.A.R.T. & TRIM command

Industrial M.2 2230 Embedded Module, B+M Key

• Compliant with PCIe Gen3x2 interface
• Compliance: NVMe 1.3/ PCI Express Base 3.1
• 3D TLC flash memory
• Capacity: 64GB/ 128GB/ 512GB
• End-to-End data protection
• SLC write cache technology
• Thermal throttling technology
• Operating as boot disk
• Static and dynamic wear leveling
• Bad block management
• S.M.A.R.T. & TRIM command

PCIe x4 Quad-port PoE+ 2.5GbE Vision Frame Grabber Card (Intel I226 based)

• Intel master chip scheme
• Mainly designed for industrial scene visual detection servers and equipment
• 30W PoE+ output, 4-Pin psu interface
• Adaptive to power output
• Large heatsink for heat dissipation

NVIDIA Quadro RTX A2000 PCIe 12GB DSLP - PCIe 4.0 x16 - 4 x miniDisplayPort, Dual Slot

• 3328 CUDA cores
• 104 Tensor cores
• 32 RT cores
• 8 TFLOPS
• Dual slot, half height
• Dimension (L x H) 167.6 x 68.6 mm

NVIDIA Quadro RTX 2000E - Graphics card - 16 Gt GDDR6 - PCIe 3.0 x16 - 4 x miniDisplayPort

• 2816 Cuda cores
• 88 Tensor cores
• 22 RT cores
• 12 TFLOPS
• Single slot, half height
• Dimension (L x H) 169,6 x 68,9mm

NVIDIA Quadro T1000 - Graphics card - Quadro T1000 - 8 GB GDDR6 - PCIe 3.0 x16 - 4 x miniDisplayPort

• 896 CUDA cores
• - Tensor cores
• - RT cores
• 2.5 TFLOPS
• Single slot, half height
• Dimension (L x H) 154.9 x 68.6 mm

M.2 2242 to single isolated CAN bus Module

• Compliant with PCI Express 1.1
• Meet the Requirements of the ISO 11898-1
• CAN bus 2.0B backward compatible with 2.0A
• Support baud rate 10/20/50/100/250/500/800/1000K
• Support CAN message acceptance filter
• Support Linux SocketCAN
• Compliant with IEC 60950-1:2005 + A1: 2009 + A2:2013 2.5kV HiPOT protection
• Compliant with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
• Termination resistor enabled/disabled by switch
• Industrial Temperature (-40°C to +85°C) support

Industrial U.3 NVMe Enterprise Grade SSD

• Compliant with PCIe Gen4x4 Interface
• Compliance: NVMe 1.4/ PCIe Base 4.0
• 3D TLC NAND Flash (eTLC)
• Capacity: 1920GB ~ 7680GB
• Powerguard Function (Power Loss Protection)
• Support AES 256-bit Encryption
• End-to-End Data Protection
• Dynamic Thermal Throttling
• Heat Dissipation Design on the Case
• Operating as Boot Disk

Industrial U.3 NVMe Enterprise Grade SSD

• Compliant with PCIe Gen4x4 Interface
• Compliance: NVMe 1.4/ PCIe Base 4.0
• 3D TLC NAND Flash (eTLC)
• Capacity: 1920GB ~ 7680GB
• Powerguard Function (Power Loss Protection)
• Support AES 256-bit Encryption
• End-to-End Data Protection
• Dynamic Thermal Throttling
• Heat Dissipation Design on the Case
• Operating as Boot Disk

Industrial U.3 NVMe Enterprise Grade SSD

• Compliant with PCIe Gen4x4 Interface
• Compliance: NVMe 1.4/ PCIe Base 4.0
• 3D TLC NAND Flash (eTLC)
• Capacity: 1920GB ~ 7680GB
• Powerguard Function (Power Loss Protection)
• Support AES 256-bit Encryption
• End-to-End Data Protection
• Dynamic Thermal Throttling
• Heat Dissipation Design on the Case
• Operating as Boot Disk

Industrial 2.5" U.2 SSD, Wide-Temp,  iCell

• PCIe Gen. 4x4, NVMe 1.4
• Excellent data transfer speed
• Heat-spreading design
• LDPC ECC engine supported.
• End-to-end Data Path Protection
• High capacity & ultra-speed

Industrial 2.5" U.2 SSD, Wide-Temp,  iCell

• PCIe Gen. 4x4, NVMe 1.4
• Excellent data transfer speed
• Heat-spreading design
• LDPC ECC engine supported.
• End-to-end Data Path Protection
• High capacity & ultra-speed

Industrial 2.5" U.2 SSD, Wide-Temp,  iCell

• PCIe Gen. 4x4, NVMe 1.4
• Excellent data transfer speed
• Heat-spreading design
• LDPC ECC engine supported.
• End-to-end Data Path Protection
• High capacity & ultra-speed

Industrial 2.5" U.2 SSD, Wide-Temp,  iCell

• PCIe Gen. 4x4, NVMe 1.4
• Excellent data transfer speed
• Heat-spreading design
• LDPC ECC engine supported.
• End-to-end Data Path Protection
• High capacity & ultra-speed

Industrial 2.5" U.2 SSD, Wide-Temp,  iCell

• PCIe Gen. 4x4, NVMe 1.4
• Excellent data transfer speed
• Heat-spreading design
• LDPC ECC engine supported.
• End-to-end Data Path Protection
• High capacity & ultra-speed

Industrial 2.5" SATA SSD, Wide-Temp, iDataGuard, iCell

• 2.5” SATA III solution for industrial field
• High IOPS
• iSMART disk health monitoring
• End to end data path protection
• iData Guard for abnormal power failure
• iCell technology for data protection

Industrial 2.5" SATA SSD, Wide-Temp, iDataGuard, iCell

• 2.5” SATA III solution for industrial field
• High IOPS
• iSMART disk health monitoring
• End to end data path protection
• iData Guard for abnormal power failure
• iCell technology for data protection

Industrial 2.5" SATA SSD, Wide-Temp, iDataGuard, iCell

• 2.5” SATA III solution for industrial field
• High IOPS
• iSMART disk health monitoring
• End to end data path protection
• iData Guard for abnormal power failure
• iCell technology for data protection