PC Components

• LGA1151 socket 9th/8th gen Intel® Core™ i7/i5/i3, Pentium® & Celeron® processor (Coffee Lake Refresh)
• Four 288-pin DDR4-2666/2400 DIMM for up to 128GB of memory
• DisplayPort, DVI-D, HDMI and VGA with triple-view supported
• 5 SATA-600 with RAID 0/1/5/10
• 1 PCI Express Mini Card slot
• Two USB 3.1 Gen2 and four USB 3.1 Gen1
• TPM 2.0 supported (optional)

8th gen Intel® CoreTM i5-8365UEU Pico-ITX SBC with DisplayPort++, HDMI, LVDS, and 2 GbE LAN

• 8th gen Intel® Core™ processor
• 1 DDR4 SO-DIMM for up to 32GB of memory
• 2 USB 2.0 and 2 USB 3.2 Gen1
• 2 GbE LAN
• M.2 Key E
• Intel® AMT 11 supported

• Intel Atom® x7211RE processor
• On-board 4GB LPDDR5
• 1 GbE LAN
• Onboard 64GB NVMe SSD storage
• Supports M.2 Key E socket
• Supports eDP for display
• Supports operating system: Linux, Windows®

IEC 60601-1 Ready Medical-Grade ATX Motherboard with LGA4677 Socket 5th/4th Gen Intel® Xeon® Scalable Processors, Intel® C741, 4 PCIe x16, VGA, and NVMe

• 5th/4th Gen Intel® Xeon® Scalable processors
• 8 DDR5-5200 ECC RDIMM
• Supports up to 4 PCIe x16 double-slot expansion cards
• Supports 2 Mini Cool Edge IO (MCIO) connectors with PCIe Gen 5 x8
• Supports dual 10GbE LAN ports and 1 dedicated IPMI LAN port
• Supports TPM 2.0
• Supports redundant BIOS and BMC

M.2 2280 (B+M key) dual isolated CAN bus FD/2.0B board (-40℃~+85℃)

• Single-Lane (x1) PCI-Express with throughput up to 5.0 / 2.5GT/s
• Fully compliant with PCI-Express Base Specification Rev. 2.0
• Meet the Requirements of the ISO 11898-1:2015 Mixed CAN FD and CAN 2.0A/B mode
• Support baud rate 10/20/50/100/125/250/500/800/1000K
• Support data(BRS) baud rate 1M/2M/4M/5M
• Support CAN message acceptance filter
• Compliant with EN61000-4-2 (ESD) Air-15kV, Contact-8kV

1-Port EtherCAT I/O MainDevice mPCIe Card

• Meets Advantech iDoor technology standard
• PCI ExpressR Mini card specification revision 1.2 compliant
• Identical interface for all EtherCAT Motion Cotrollers
• Support high speed IO control in EtherCAT
• Connect I/O SubordinateDevice automatically without ESI/ENI
• Easy-to-use EtherCAT integrated development environment
• Provide error detection and diagnostics to monitor the entire EtherCAT network

ATX Motherboard with LGA1851 Socket 15th Gen Intel® Core™ Ultra 9/7/5 Processors, Intel® W880, USB 3.2 Gen 2, SATA 3.0, 2.5GbE LAN, DisplayPort++, and HDMI

• LGA1851 socket 15th Gen Intel® Core™ Ultra 9/7/5 processors (Arrow Lake-S)
• Four 288-pin DDR5-4400 ECC/non-ECC unbuffered Long-DIMM, up to 192GB
• Supports DisplayPort++ and HDMI
• Supports 2 M.2 Key M 2280
• Supports 2 PCIe x16 slots with PCIe Gen 5 for GPU cards
• Supports IPMI 2.0
• Optimized CPU socket layout design for airflow of the rackmount system

M.2 2242 (USB HS) to Single Isolated CAN FD

• Baud rate up to 5 / 10 / 20 / 50 / 100 / 125 / 250 / 500 (default) / 800 / 1000K
• Data rate up to 2 / 4 / 5Mbps (For more details, refer to *Notes in the specification table below)
• CAN 2.0 up to 7,800 frame/s (RX baud rate 1M, EID, 8byte data)
• CAN FD up to 6,000 frame/s (RX baud rate 1M, data rate 5M, EID, 64byte data)