Fiber to Ethernet

Industrial Gigabit Ethernet-to-fiber media converter

• Metal enclosure with compact size
• Industrial grade design that supports extended operating temperature(IMC-370I series)
• Provides status LED
• Supports multiple power options: AC or DC adapter and dual USB cable
• Supports Link Fault Pass Through (LFPT) (IMC-370I-SFP)
• Centralized powered IMC-318I chassis

Mini PoE+ Media Converter, 1000Mbps, SFP

• Supports IEEE802.3at PoE+ (25.5W) and IEEE802.3af PoE (15.4W) standards
• Serves as a power sourcing equipment (PSE) device
• Supports jumbo frame functionality (up to 10240 bytes)
• Supports multiple mounting options (desktop, DIN rail or wall-mount)
• Features in configurable PoE reset on fiber LOS
• Supports Link Fault Pass Through (LFPT)

Managed Hardened Media Converter, 1000Mbps, 2xSFP (also known as IE-Multiway 854-11121)

• Versatile 4-port media converter
• Supports SNMP for management
• Supports a variety of SFP modules
• Works under an extended temperature range
• Supports OAM, VLAN, 1+1 revertive
• Provides RS-232 CLI (command line interface) console port

2GE PoE, SFP Injector ,IEEE802.3af/at, 48VDC, -40~75℃

• Supports multi-rate for SFP slot
• IEEE 802.3af/at compliant
• Power input 48 VDC, supply 30W per port
• Provides slim size and DIN-rail/Wall mount with IP31 metal mechanism
• Supports operating temperatures from -40 to 75°C

10G Stand Alone Hardened Ethernet Media Converter

• Provides 1xRJ45 to 1xSFP/SFP+ fiber port
• Copper port interface supports 10G/5G/2.5G/1G/100M BASE-T
• Copper port provides full/half duplex flow control
• Supports store and forward transmission
• Supports MDI/MDI-X, auto-negotiation
• Supports AC/DC power inputs dual mode power inputs
• Provides flexible mounting: DIN-Rail and panel mounts
• Supports Link Fault Pass-Through (LFPT) for troubling shooting
• Supports iber port distance from 400m up to 80km

Industrial 4TX/1SFP Light Managed PoE BT Media Converter

• Versatile 5-port, total 180W power output media converter at extended temperature
• Supports Switch/Injector mode setting by SNMP/iView
• Supports SNMP/iView for remote management
• Dip switch for LFPT and Power Force mode
• Supports LLDP
• Supports Jumbo Frames up to 9,216 bytes
• Supports Modbus/TCP
• Supports Broadcast Storm Control ON/OFF

Ethernet to fiber media converter, Single mode, SC-connector

• Wide input range DC power supply.
• Plug-and-Play design for the installation within seconds.
• Compact and Rugged Metal case capable of withstanding harsh environment.
• Data rate: 10/100Mbps auto-negotiation and half-/Full-duplex mode on TX port.
• Auto MDI-X/MDI-II for 10/100Base-TX port.
• Provides media conversion from UTP to Fiber Optic media types
• Supports link fault pass through function.
• Supports far end fault function.
• LED display to indicate the whole working status. 
• 3 power input types: Direct USB power, external DC adapter and screw terminal.
• Support IEEE Standard: 802.3u 100BaseTX & 100BaseFX

Industrial Gigabit Ethernet-to-fiber media converters

• Supports 1000Base-SX/LX with SC connector or SFP slot
• Link Fault Pass-Through (LFPT)
• 10K jumbo frame Redundant power inputs
• -40 to 75°C operating temperature range (-T models)
• Supports Energy-Efficient Ethernet (IEEE 802.3az)

IEEE 802.3af PoE Ethernet-to-fiber media converters

• 10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X
• IEEE 802.3af and PoE standard compliance
• IEEE 802.3at and PoE+ standard compliance (HW Rev. 1.1.0 and later )
• Power failure alarm by relay output
• Supports store-and-forward mode and pass-through mode
• -40 to 75°C operating temperature range (-T model)
• Redundant dual DC power inputs

Industrial Gigabit Ethernet to fiber media converter

• 10/100/1000BaseT(X) and 1000BaseSFP slot supported
• Link Fault Pass-Through (LFPT)
• Power failure, port break alarm by relay output
• Redundant power inputs
• -40 to 75°C operating temperature range (-T models)
• Designed for hazardous locations (Class 1 Div. 2/Zone 2, IECEx)

Entry-level industrial 10/100BaseT(X)-to-100BaseFX media converters

• Multi-mode or single-mode, with SC or ST fiber connector
• Link Fault Pass-Through (LFPT)
• DIP switches to select FDX/HDX/10/100/Auto/Force