New Arrivals

Medical Grade System with 13th Gen Intel® Core™ i9/i7/i5/i3 Processor for Smart Healthcare Applications

• 13th gen Intel® i9/i7/i5/i3 processor with Intel® R680E chipset, up to 65W TDP
• 2 DDR4-3200 SO-DIMM, up to 64GB memory
• 2 HDMI 1.4b and 1 DisplayPort++ 1.2 with 4K UHD resolution
• 2 COM and two 2.5GbE LAN
• 2 PCIe x16 expansion slots for GPU and capture cards
• 1 M.2 Key E 2230 and 1 M.2 Key B 3052/3042
• 1 M.2 Key M 2280 slot and two 2.5" SATA III drives

PCIe x4 Quad-port PoE+ 2.5GbE Vision Frame Grabber Card (Intel I226 based)

• Intel master chip scheme
• Mainly designed for industrial scene visual detection servers and equipment
• 30W PoE+ output, 4-Pin psu interface
• Adaptive to power output
• Large heatsink for heat dissipation

NVIDIA Quadro RTX A5500 PCIe 24GB DSFH , 4 x DisplayPort, Dual Slot

• 12240 CUDA cores
• 320 Tensor cores
• 80 RT cores
• 34.1 TFLOPS
• Dual slot, Full height
• Dimension (L x H) 266.8 x 111,8 mm

NVIDIA Quadro RTX 5000 Ada 32GB PCI-Ex16 DP*4 FS , 4 x DisplayPort, Dual Slot

• 12800 CUDA cores
• 400 Tensor cores
• 100 RT cores
• 65.3 TFLOPS
• Dual slot, Full height
• Dimension (L x H) 266.8 x 111,8 mm

NVIDIA Quadro RTX 6000 Ada PCIe 48GB DSFH- 4 x DisplayPort, Dual Slot

• 18176 CUDA cores
• 568 Tensor cores
• 142 RT cores
• 91.1 TFLOPS
• Dual slot, Full height
• Dimension (L x H) 266.8 x 111,8 mm

NVIDIA Quadro RTX A2000 PCIe 12GB DSLP - PCIe 4.0 x16 - 4 x miniDisplayPort, Dual Slot

• 3328 CUDA cores
• 104 Tensor cores
• 32 RT cores
• 8 TFLOPS
• Dual slot, half height
• Dimension (L x H) 167.6 x 68.6 mm

NVIDIA Quadro RTX 2000E - Graphics card - 16 Gt GDDR6 - PCIe 3.0 x16 - 4 x miniDisplayPort

• 2816 Cuda cores
• 88 Tensor cores
• 22 RT cores
• 12 TFLOPS
• Single slot, half height
• Dimension (L x H) 169,6 x 68,9mm

NVIDIA Quadro T1000 - Graphics card - Quadro T1000 - 8 GB GDDR6 - PCIe 3.0 x16 - 4 x miniDisplayPort

• 896 CUDA cores
• - Tensor cores
• - RT cores
• 2.5 TFLOPS
• Single slot, half height
• Dimension (L x H) 154.9 x 68.6 mm

Ultra-Compact DIN-Rail Fanless Embedded System with Intel® Celeron® Processor N3350, COM, 2 LAN, 4 USB, HDMI, WT

• Super compact size with fanless and cableless design
• Intel® Celeron® processor N3350, reliable F1 stepping version CPU
• COM, 4 USB, and 2 GbE LAN
• Wide operating temperature range from -40°C to +70°C
• 9 to 36 VDC wide range power input (typical: 12 to 24 VDC)
• OVP, UVP, OCP, and RPP power protection design
• AXEAPI for intelligent remote monitoring software integration

Fanless Embedded System, Intel N100 (4-Core) CPU, 2x HDMI, 2x 2.5Gb LAN, 6x USB, 2x COM

• Onboard Intel Alder Lake-N N100 CPU (6W)
• Dual monitor support (2x HDMI)
• 2x 2.5G LAN (Intel i225-V)
• 4G LTE & WLAN support
• Small size, Fanless system (150 x 127 x 48mm)

M.2 PCIe Industrial 2-port 2.5GbE isolated Ethernet board (-40℃~+85℃) / 1x Universal Bracket with 2x RJ45 Cutout

• Dual-Lane (x2) PCI-Express with throughput up to 5.0/2.5GT/s
• Fully compliant with PCI-Express Base Specification Rev.2.1
• Integrated 10/100/1000/2500Mbps transceiver
• IEEE 802.3, IEEE802.3u, IEEE 802.3ab, IEEE 802.3z and IEEE 802.3bz compliant
• IEEE 802.3x and IEEE 802.3z flow control
• Support Wake-on-LAN

M.2 PCIe Industrial 2-port GbE isolated Ethernet board (-40℃~+85℃) / 1x Universal Bracket with 2x RJ45 Cutout

• Single-Lane (x1) PCI-Express with throughput up to 5.0/2.5Gbps
• Fully compliant with PCI-Express Base Specification Rev. 2.0
• Integrated 10/100/1000Mbps transceiver
• IEEE 802.3x Full-Duplex flow control
• IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, and IEEE 802.3z compliant
• Complies with EN61000-4-2(ESD) Air-15kV, Contact-8kV
• Complies with EN61000-4-4(EFT) 2kV
• Complies with EN61000-4-5 2kV Surge protection

M.2 2242 to single isolated CAN bus Module

• Compliant with PCI Express 1.1
• Meet the Requirements of the ISO 11898-1
• CAN bus 2.0B backward compatible with 2.0A
• Support baud rate 10/20/50/100/250/500/800/1000K
• Support CAN message acceptance filter
• Support Linux SocketCAN
• Compliant with IEC 60950-1:2005 + A1: 2009 + A2:2013 2.5kV HiPOT protection
• Compliant with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
• Termination resistor enabled/disabled by switch
• Industrial Temperature (-40°C to +85°C) support

USB3.0 Läpivienti liitin

• Metalli & muovi

mPCIe to dual isolated J1939/CANopen Module

• Compliant with ISO 11898-2
• Support baud rate 100/125/250/500(default)/800/1000K
• Support CAN message acceptance filter, listen-only mode
• Keep configuration after hardware reboot
• Up to 7,800 frame/s (receiving at 1Mbps, EID, 8byte data)
• Additional driver to support Linux SocketCAN
• Support SAE J1939/CANopen high layer protocol
• Termination resistor enabled/disabled by jumper
• Complies with EN61000-4-5 2.5kV Surge protection
• Complies with IEC 60950-1:2005 + A1: 2009 + A2:2013 2.5kV HiPOT protection
• Complaint with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
• Supports 3rd mounting hole and USB Pin header for out-ofminicard installation
• 30μ” golden finger, 3-year warranty
• Industrial Temperature (-40°C to +85°C) support

7" Touch Panel PC with i.MX8 CPU

• i.MX 8M Mini Cortex-A53 1.6Ghz
• 2GB RAM + 16GB Flash ROM
• 1280*800 res, 800nits High-Brightness LCD
• 2x LAN, USB, COM, CANbus2.0B, GPIO
• WLAN & BT5.0, Optional 4G LTE
• Linux Debian10 OS

Industrial U.3 NVMe Enterprise Grade SSD

• Compliant with PCIe Gen4x4 Interface
• Compliance: NVMe 1.4/ PCIe Base 4.0
• 3D TLC NAND Flash (eTLC)
• Capacity: 1920GB ~ 7680GB
• Powerguard Function (Power Loss Protection)
• Support AES 256-bit Encryption
• End-to-End Data Protection
• Dynamic Thermal Throttling
• Heat Dissipation Design on the Case
• Operating as Boot Disk

Industrial U.3 NVMe Enterprise Grade SSD

• Compliant with PCIe Gen4x4 Interface
• Compliance: NVMe 1.4/ PCIe Base 4.0
• 3D TLC NAND Flash (eTLC)
• Capacity: 1920GB ~ 7680GB
• Powerguard Function (Power Loss Protection)
• Support AES 256-bit Encryption
• End-to-End Data Protection
• Dynamic Thermal Throttling
• Heat Dissipation Design on the Case
• Operating as Boot Disk

Industrial U.3 NVMe Enterprise Grade SSD

• Compliant with PCIe Gen4x4 Interface
• Compliance: NVMe 1.4/ PCIe Base 4.0
• 3D TLC NAND Flash (eTLC)
• Capacity: 1920GB ~ 7680GB
• Powerguard Function (Power Loss Protection)
• Support AES 256-bit Encryption
• End-to-End Data Protection
• Dynamic Thermal Throttling
• Heat Dissipation Design on the Case
• Operating as Boot Disk

Fanless Embedded System with Intel® Alder Lake-N Processor, 2 LAN/4 LAN, HDMI, DisplayPort++, 2 COM, 4 USB, and 9 to 36 VDC

• Intel® processor N97 quad-core SoC (Alder Lake-N)
• 1 DDR4 SO-DIMM, up to 32GB
• Operating temperature ranges from -20°C to +60°C
• Supports either two or four 2.5GbE versions
• 4 USB with a power on/off feature and 2 COM
• Supports HDMI (FHD) and DisplayPort++ for dual-view
• Front-access I/O design