Industrial communication

• CANbus 2.0B backward compatible with 2.0A
• Support baud rate 100/125/250/500(default)/800/1000K
• Support CAN message acceptance filter
• Keep configuration after hardware reboot
• Up to 6000 CAN messages per second (receive data)
• Support Listen-only mode
• Additional driver to support Linux SocketCAN
• Termination resistor enabled/disabled by jumper
• Complies with EN61000-4-5 2.5kV Surge protection
• Complies with IEC 60950-1:2005 + A1: 2009 + A2:2013 2.5kV HiPOT protection
• Complies with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
• Supports 3^rd mounting hole and USB Pin header for out-of minicard installation
• Supports -40 to +85 degrees

Mini PCI-e 4-port RS-232/422/485 serial board with power input

• Single-Lane (x1) PCI-Express with throughput up to 5.0 / 2.5Gbps
• Fully compliant with PCI-Express Base Specification Rev 2.0
• Top serial transmission performance up to 921.6 Kbps baud rate
• FIFO 256 Bytes, 15 KV ESD protections on board
• H/W, S/W automate flow control supported
• RS-232/422/485 mode selectable by DIP switch setting
• Each port supports 5V or 12V power output by DIP switch setting

2-port 10GbE PoE PCIe Card

• Intel® Ethernet Controller X550-AT2, up to 10 Gbps data rate
• Supports 15.5KB Jumbo Frame and IEEE 1588
• Compliant with IEEE802.3at to deliver 25.5W per port
• PCI Express x4 compliant
• PoE power on/off via Power Manager software and API
• Operating temperature range from 0°C to 55°C

12DI/12DO Intelligent I/O Gateway

• Linux Open Platform
• 12ch digital input(counter)/12ch digital output(pulse output)
• Programming: linux C API, Node-RED (graphic programming environment)
• Cloud/Database access ,edge data analysis and logic control, data visualization by dashboard
• Interfaces: RS-485x2, Ethernet port x 2 ,1 x USB Type-A 2.0, 1 x USB Micro-B 2.0

Industrial Gigabit Ethernet-to-fiber media converters

• Supports 1000Base-SX/LX with SC connector or SFP slot
• Link Fault Pass-Through (LFPT)
• 10K jumbo frame Redundant power inputs
• -40 to 75°C operating temperature range (-T models)
• Supports Energy-Efficient Ethernet (IEEE 802.3az)

8+2G-port Gigabit PoE+ managed Ethernet switches with 8 IEEE 802.3af/at PoE+ ports

• 8 built-in PoE+ ports compliant with IEEE 802.3af/at
• Up to 36 W output per PoE+ port
• 3 kV LAN surge protection for extreme outdoor environments
• PoE diagnostics for powered-device mode analysis
• 2 Gigabit combo ports for high-bandwidth and long-distance communication
• Operates with 240 watts full PoE+ loading at -40 to 75°C
• Supports MXstudio for easy, visualized industrial network management
• V-ON™ ensures millisecond-level multicast data and video network recovery

16G-port full Gigabit managed Ethernet switches

• Up to 12 10/100/1000BaseT(X) ports and 4 100/1000BaseSFP ports
• Turbo Ring and Turbo Chain (recovery time < 50 ms @ 250 switches), and STP/RSTP/MSTP for network redundancy
• RADIUS, TACACS+, MAB Authentication, SNMPv3, IEEE 802.1X, MAC ACL, HTTPS, SSH, and sticky MAC-addresses to enhance network security
• Security features based on IEC 62443
• EtherNet/IP, PROFINET, and Modbus TCP protocols supported for device management and monitoring
• Supports MXstudio for easy, visualized industrial network management
• V-ON™ ensures millisecond-level multicast data and video network recovery

8G-port full Gigabit managed Ethernet switches

• Turbo Ring and Turbo Chain (recovery time < 50 ms @ 250 switches), RSTP/STP, and MSTP for network redundancy
• RADIUS, TACACS+, MAB Authentication, SNMPv3, IEEE 802.1X, MAC ACL, HTTPS, SSH, and sticky MAC-addresses to enhance network security
• Security features based on IEC 62443
• EtherNet/IP, PROFINET, and Modbus TCP protocols supported for device management and monitoring
• Supports MXstudio for easy, visualized industrial network management
• V-ON™ ensures millisecond-level multicast data and video network recovery

24+4G-port Gigabit managed Ethernet switches

• 4 Gigabit plus 24 fast Ethernet ports for copper and fiber
• Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), RSTP/STP, and MSTP for network redundancy
• RADIUS, TACACS+, MAB Authentication, SNMPv3, IEEE 802.1X, MAC ACL, HTTPS, SSH, and sticky MAC-addresses to enhance network security
• Security features based on IEC 62443
• EtherNet/IP, PROFINET, and Modbus TCP protocols supported for device management and monitoring Supports
• MXstudio for easy, visualized industrial network management
• V-ON™ ensures millisecond-level multicast data and video network recovery

8-port managed Ethernet switches

• Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and STP/RSTP/MSTP for network redundancy
• TACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security
• Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01
• Supports MXstudio for easy, visualized industrial network management

5-port managed Ethernet switches

• Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and STP/RSTP/MSTP for network redundancy
• TACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security
• Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01
• Supports MXstudio for easy, visualized industrial network management