Industrial communication

128-ch Isolated Digital I/O PCIE Card

• Interrupt handling capability for each channel
• 128 isolated digital output channels (64 channels for PCI-1758UDIO)
• High-voltage isolation on output channels (2,500 VDC)
• Wide output range (5 ~ 40 VDC)
• High-sink current for isolated output channels (90 mA max./channel)
• BoardID™ switch
• Digital output value retained after hot system reset
• PCIE-1758DI and PCIE-1758DIO
• 128 isolated digital input channels (64 channels for PCI-1758UDIO)
• Wide input range (10 ~ 30 VDC)
• High ESD protection (2,000 VDC)
• Digital Filter function

128-ch Isolated Digital I/O PCIE Card

• Interrupt handling capability for each channel
• 128 isolated digital output channels (64 channels for PCI-1758UDIO)
• High-voltage isolation on output channels (2,500 VDC)
• Wide output range (5 ~ 40 VDC)
• High-sink current for isolated output channels (90 mA max./channel)
• BoardID™ switch
• Digital output value retained after hot system reset
• PCIE-1758DI and PCIE-1758DIO
• 128 isolated digital input channels (64 channels for PCI-1758UDIO)
• Wide input range (10 ~ 30 VDC)
• High ESD protection (2,000 VDC)
• Digital Filter function

LAN to Dual CAN Bus 2.0B

• Expands I/O through virtualization technology
• Simulate remote I/O on local computer
• Keeps I/O behavior and data format. No change of I/O operation
• Meets the requirements of the ISO 11898-1
• Supports PoE connection compliant with IEEE 802.3at/af
• Supports CAN message acceptance filter

1-Port EtherCAT I/O MainDevice mPCIe Card

• Meets Advantech iDoor technology standard
• PCI ExpressR Mini card specification revision 1.2 compliant
• Identical interface for all EtherCAT Motion Cotrollers
• Support high speed IO control in EtherCAT
• Connect I/O SubordinateDevice automatically without ESI/ENI
• Easy-to-use EtherCAT integrated development environment
• Provide error detection and diagnostics to monitor the entire EtherCAT network

Light EtherCAT PCIE MDevice Card

• 667MHz dual-core ARM processor
• 2 x EtherCAT ports for high-performance of Motion and I/O applications
• Supports common motion SDK for rapid application development
• Supports point to point move
• Supports 2 axis Linear interpolation
• Supports programmable acceleration/deceleration rate
• Programmable interrupt
• Diagnostics for fast error handling can trace command and error message

Full Function EtherCAT PCIE MDevice Card

• 667MHz dual-core ARM processor
• 2 x EtherCAT ports for high-performance of motion and I/O applications
• Supports common motion SDK for rapid application development
• Supports PTP, linear and circle interpolation, Path table, Compare, Latch, Compare delay DO trigger function
• Supports programmable acceleration/deceleration rate
• Diagnostics for fast error handling can trace command and error message

EtherCAT IO MDevice PCIE Card

• 667MHz dual-core ARM processor
• 2 x EtherCAT ports for 250/200us cycle time
• Up to DI 1024 CH / DO 1024 CH / AI 128 CH / AO 128 CH IO Control
• Diagnostics for fast error handling can trace command and error message

M.2 2242 to Four RS-232 Module, Vertical Connector / Wide Temperature

• 4800bps to 921.6Kbps serial data rate
• PCI Express base spec 1.1 compliant
• Compatible with 16C550 / 16C650 / 16C750 / 16C850 / 16C950, 128-byte FIFOs
• Full RS-232 functions with DB9 connector
• Alternative vertical or horizontal connector
• Complies with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
• Operating temperature from -40°C to 85°C

PCIe to Four Isolated CAN FD Module

• Baud rate up to 5 / 10 / 20 / 50 / 100 / 125 / 250 / 500 (default) / 800 / 1000K
• CAN2.0 up to 7,800 frame/s (RX baud rate 1M, EID, 8byte data)
• CANFD up to 6,000 frame/s (RX baud rate 1M, data rate 5M, EID, 64byte data) 
• Data rate supports 2 / 4 / 5Mbps
• Complies with IEC 60950-1 : 2005 + A1 : 2009 + A2 : 2013 2.5kV HiPOT protection
• Complaint with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
• Termination resistor enabled / disabled by jumper
• Optional M.2 slot to expand 2 ~ 4 more CAN ports by installing EGUC series

PCIe to Dual Isolated CAN FD Module

• Baud rate up to 5 / 10 / 20 / 50 / 100 / 125 / 250 / 500 (default) / 800 / 1000K
• CAN2.0 up to 7,800 frame/s (RX baud rate 1M, EID, 8byte data)
• CANFD up to 6,000 frame/s (RX baud rate 1M, data rate 5M, EID, 64byte data) 
• Data rate supports 2 / 4 / 5Mbps
• Complies with IEC 60950-1 : 2005 + A1 : 2009 + A2 : 2013 2.5kV HiPOT protection
• Complaint with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
• Termination resistor enabled / disabled by jumper
• Optional M.2 slot to expand 2 ~ 4 more CAN ports by installing EGUC series

M.2 2280 to Four Isolated CAN FD Module

• Complies with IEC 60950-1 : 2005 + A1 : 2009 + A2 : 2013 2.5kV HiPOT protection
• Complaint with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
• Termination resistor enabled / disabled by jumper
• Additional driver to support Linux SocketCAN
• Complies with IEC 60950-1 : 2005 + A1 : 2009 + A2 : 2013 2.5kV HiPOT protection
• Complaint with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
• Termination resistor enabled / disabled by jumper
• Additional driver to support Linux SocketCAN

M.2 2280 to Dual Isolated CAN FD Module

• Complies with IEC 60950-1 : 2005 + A1 : 2009 + A2 : 2013 2.5kV HiPOT protection
• Complaint with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
• Termination resistor enabled / disabled by jumper
• Additional driver to support Linux SocketCAN
• Complies with IEC 60950-1 : 2005 + A1 : 2009 + A2 : 2013 2.5kV HiPOT protection
• Complaint with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
• Termination resistor enabled / disabled by jumper
• Additional driver to support Linux SocketCAN

4G/5G/ Ethernet Gateway

• Cortex-A53 CPU, 1.6 GHz, quad-core
• 1 GB LPDDR4 RAM and 8 GB eMMC Flash
• Linux Kernel 4.14.98
• Provide NAT and port forwarding function
• Intelligent Remote Terminal Unit (RTU)
• Intelligent multiport serial gateway
• 4G / 5G wireless module (option)
• 64-bit Hardware Serial Number for Software Protection
• 10/100/1000M Two Ethernet Ports
• 4 Serial Ports (RS-232/485)

mPCIe to dual isolated J1939/CANopen Module

• Compliant with ISO 11898-2
• Support baud rate 100/125/250/500(default)/800/1000K
• Support CAN message acceptance filter, listen-only mode
• Keep configuration after hardware reboot
• Up to 7,800 frame/s (receiving at 1Mbps, EID, 8byte data)
• Additional driver to support Linux SocketCAN
• Support SAE J1939/CANopen high layer protocol
• Termination resistor enabled/disabled by jumper
• Complies with EN61000-4-5 2.5kV Surge protection
• Complies with IEC 60950-1:2005 + A1: 2009 + A2:2013 2.5kV HiPOT protection
• Complaint with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
• Supports 3rd mounting hole and USB Pin header for out-ofminicard installation
• 30μ” golden finger, 3-year warranty
• Industrial Temperature (-40°C to +85°C) support

Wi-fi 7 enterprise Access Point mPCIe card

• Qualcomm QCN9274 chipset
• Dual diplexer setup enables 2x2+2x2 data streams on the 2.4 and 5 GHz bands concurrently with only 2 antennas

8-port RS-232 USB-to-serial converters

• USB 3.2 SuperSpeed capability
• 512-byte on-chip FIFO cache and flow control for enhanced performance
• Drivers provided for a broad selection of operating systems, including Windows and Linux
• 50 bps to 921.6 kbps baudrate (nonstandard baudrates supported)
• Double-sided LEDs located at the corners show power, TX, and RX statuses in either directions
• Cascades with 3 UPort-G2 devices to up port capacity to 32 ports; no additional power adaptors required (UPort 1650-8-G2-Hub)
• Latching USB cable design for firmer connection
• Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments
• Serial port with 2 kV isolation protection (for “-I” models)

8-port RS-232/422/485 USB-to-serial converters

• USB 3.2 SuperSpeed capability
• 512-byte on-chip FIFO cache and flow control for enhanced performance
• Drivers provided for a broad selection of operating systems, including Windows and Linux
• 50 bps to 921.6 kbps baudrate (nonstandard baudrates supported)
• Double-sided LEDs located at the corners show power, TX, and RX statuses in either directions
• Cascades with 3 UPort-G2 devices to up port capacity to 32 ports; no additional power adaptors required (UPort 1650-8-G2-Hub)
• Latching USB cable design for firmer connection
• Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments
• Serial port with 2 kV isolation protection (for “-I” models)

4-port RS-232 USB-to-serial converters

• USB 3.2 SuperSpeed capability
• 512-byte on-chip FIFO cache and flow control for enhanced performance
• Drivers provided for a broad selection of operating systems, including Windows and Linux
• 50 bps to 921.6 kbps baudrate (nonstandard baudrates supported)
• Double-sided LEDs located at the corners show power, TX, and RX statuses in either directions
• Latching USB cable design for firmer connection
• Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments
• Serial port with 2 kV isolation protection (for “-I” models)

4-port RS-232/422/485 USB-to-serial converters

• USB 3.2 SuperSpeed capability
• 512-byte on-chip FIFO cache and flow control for enhanced performance
• Drivers provided for a broad selection of operating systems, including Windows and Linux
• 50 bps to 921.6 kbps baudrate (nonstandard baudrates supported)
• Double-sided LEDs located at the corners show power, TX, and RX statuses in either directions
• Latching USB cable design for firmer connection
• Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments
• Serial port with 2 kV isolation protection (for “-I” models)

2-port RS-232/422/485 USB-to-serial converters

• USB 3.2 SuperSpeed capability
• 50 bps to 921.6 kbps baudrate (nonstandard baudrates supported)
• 512-byte on-chip FIFO cache and flow control for enhanced performance
• Double-sided LEDs located at the corners show power, TX, and RX statuses in either directions
• Drivers provided for a broad selection of operating systems, including Windows and Linux
• Latching USB cable design for firmer connection
• Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments
• Serial port with 2 kV isolation protection (for “-I” models)

7 -port general-purpose USB 3.2 hub

• USB-IF certification
• USB 3.2 SuperSpeed capability
• Latching USB cable design for firmer connection
• Comprehensive diagnostic LEDs
• Dual power inputs (power jack and terminal block)
• DIN-rail housing and wall-mountable housing
• Rugged metal housing

4 -port general-purpose USB 3.2 hub

• USB-IF certification
• USB 3.2 SuperSpeed capability
• Latching USB cable design for firmer connection
• Comprehensive diagnostic LEDs
• Dual power inputs (power jack and terminal block)
• DIN-rail housing and wall-mountable housing
• Rugged metal housing

7 -port general-purpose USB 3.2 hub

• USB-IF certification
• USB 3.2 SuperSpeed capability
• IP30 aluminum housing
• DIN-rail housing and wall-mountable housing

4 -port general-purpose USB 3.2 hub

• USB-IF certification
• USB 3.2 SuperSpeed capability
• IP30 aluminum housing
• DIN-rail housing and wall-mountable housing

12G-port full Gigabit managed Ethernet switches with an 8 802.3bt PoE port option

• Developed according to the IEC 62443-4-1 and compliant with the IEC 62443-4-2 industrial cybersecurity standards
• Support for IEEE 802.3bt PoE for up to 90 W output per port
• Increased bandwidth capabilities with fiber SFP slots supporting up to 2.5 Gbps
• Turbo Ring and Turbo Chain (recovery time < 50 ms @ 250 switches), and RSTP/STP for network redundancy
• Wide range of power input options for flexible deployment
• Compact and flexible housing design to fit into confined spaces
• Supports MXstudio for easy, visualized industrial network management

8+4G-port managed Ethernet switches with an 8 802.3bt PoE port option

• Developed according to the IEC 62443-4-1 and compliant with the IEC 62443-4-2 industrial cybersecurity standards
• Support for IEEE 802.3bt PoE for up to 90 W output per port
• Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches) , and RSTP/STP for network redundancy
• Wide range of power input options for flexible deployment
• Compact and flexible housing design to fit into confined spaces
• Supports MXstudio for easy, visualized industrial network management

8-port managed Ethernet switches with options of 4 802.3bt PoE ports or 4 Gigabit uplink ports

• Developed according to the IEC 62443-4-1 and compliant with the IEC 62443-4-2 industrial cybersecurity standards
• Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches) , and RSTP/STP for network redundancy
• Support for IEEE 802.3bt PoE for up to 90 W output per port
• Wide range of power input options for flexible deployment
• Compact and flexible housing design to fit into confined spaces
• Supports MXstudio for easy, visualized industrial network management

mPCIe to dual isolated CANbus 2.0B Module

• Compliant with ISO 11898-2
• Support baud rate 100/125/250/500(default)/800/1000K
• Support CAN message acceptance filter, listen-only mode
• Keep configuration after hardware reboot
• Up to 7,800 frame/s (receiving at 1Mbps, EID, 8byte data)
• Additional driver to support Linux SocketCAN
• Support SAE J1939/CANopen high layer protocol (Optional)
• Termination resistor enabled/disabled by jumper
• Complies with EN61000-4-5 2.5kV Surge protection
• Complies with IEC 60950-1:2005 + A1: 2009 + A2:2013 2.5kV HiPOT protection
• Complaint with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
• Supports 3rd mounting hole and USB Pin header for out-ofminicard installation
• 30μ” golden finger, 3-year warranty
• Industrial Temperature (-40°C to +85°C) support

8SSR Relay/8 DI Intelligent I/O Gateway

• Linux open platform
• 8-channel SSR relay/ 8-channel digital input
• Programming: Linux C API, Node-RED (graphic programming environment)
• Cloud / database access, edge data analysis and logic control, and data visualization by dashboard 
• Interfaces: RS-485x2, Ethernet port x 2 ,1 x USB Type-A 2.0, 1 x USB Micro-B 2.0

EMEA/LATAM/APAC, 2x Ethernet, Wi-Fi, Metal, Without Accessories

• LTE cat.4, 3G/HSPA+, GPRS/EDGE, EMEA, 2x SIM
• LTE B1, B3, B7, B8, B20
• DIN and Wall mount options
• 2x ETH
• WiFi - 802.11n, AP, Multi SSID, WDS
• Operating temp. –30 °C to +70 °C, Power input : 5-18VDC (DC Jack), accessory with EU type power adapter
• Certifications: CE
• Diagnostics, VPN support, Firewall, WAN failover