Computers

PCI- e low profile 8 port USB3.2 board

• Quad-Lane (x4) PCI-Express with throughput up to 5.0/2.5GT/s
• 8-port USB 3.2 PCI Express Card with 4 independent host controllers
• 900 mA/1500 mA max. per port configurable via switch settings
• Support Hot-Swap function
• Support individual four USB devices running 5Gbps at full speed
• Support simultaneous operation of multiple USB 1.1, USB 2.0, and USB 3.2 GEN1x1 devices
• USB data transfer rate of 1.5/ 12/ 480/ 5000 Mbps
• With Type-C cable

PCI- e low profile 8 port USB3.2 board

• Quad-Lane (x4) PCI-Express with throughput up to 5.0/2.5GT/s
• 8-port USB 3.2 PCI Express Card with 4 independent host controllers
• 900 mA/1500 mA max. per port configurable via switch settings
• Support Hot-Swap function
• Support individual four USB devices running 5Gbps at full speed
• Support simultaneous operation of multiple USB 1.1, USB 2.0, and USB 3.2 GEN1x1 devices
• USB data transfer rate of 1.5/ 12/ 480/ 5000 Mbps

PCI- e low profile 8 port USB3.2 board

• Quad-Lane (x4) PCI-Express with throughput up to 5.0/2.5GT/s
• 4-port USB 3.2 PCI Express Card with 4 independent host controllers
• 900 mA/1500 mA max. per port configurable via switch settings
• Support Hot-Swap function
• Support individual four USB devices running 5Gbps at full speed
• Support simultaneous operation of multiple USB 1.1, USB 2.0, and USB 3.2 GEN1x1 devices
• USB data transfer rate of 1.5/ 12/ 480/ 5000 Mbps

Industrial M.2 2230 Embedded Module, B+M Key

• Compliant with PCIe Gen3x2 interface
• Compliance: NVMe 1.3/ PCI Express Base 3.1
• 3D TLC flash memory
• Capacity: 64GB/ 128GB/ 512GB
• End-to-End data protection
• SLC write cache technology
• Thermal throttling technology
• Operating as boot disk
• Static and dynamic wear leveling
• Bad block management
• S.M.A.R.T. & TRIM command

Industrial M.2 2230 Embedded Module, B+M Key

• Compliant with PCIe Gen3x2 interface
• Compliance: NVMe 1.3/ PCI Express Base 3.1
• 3D TLC flash memory
• Capacity: 64GB/ 128GB/ 512GB
• End-to-End data protection
• SLC write cache technology
• Thermal throttling technology
• Operating as boot disk
• Static and dynamic wear leveling
• Bad block management
• S.M.A.R.T. & TRIM command

Robust RISC-based DIN-rail Fanless Embedded System with i.MX 8MP Processor, 4 Isolated COM, and 2 Isolated CAN FD

• Fanless design
• RISC-based i.MX 8M-Plus processor
• 2GB LPDDR4 onboard
• 16GB eMMC onboard
• Isolated COM and CAN FD ports
• 9 to 48 VDC wide range power input with terminal block
• Wide operating temperature range from -40°C to +70°C

PCIe x4 Quad-port PoE+ 2.5GbE Vision Frame Grabber Card (Intel I226 based)

• Intel master chip scheme
• Mainly designed for industrial scene visual detection servers and equipment
• 30W PoE+ output, 4-Pin psu interface
• Adaptive to power output
• Large heatsink for heat dissipation

NVIDIA Quadro RTX A2000 PCIe 12GB DSLP - PCIe 4.0 x16 - 4 x miniDisplayPort, Dual Slot

• 3328 CUDA cores
• 104 Tensor cores
• 32 RT cores
• 8 TFLOPS
• Dual slot, half height
• Dimension (L x H) 167.6 x 68.6 mm

NVIDIA Quadro RTX 2000E - Graphics card - 16 Gt GDDR6 - PCIe 3.0 x16 - 4 x miniDisplayPort

• 2816 Cuda cores
• 88 Tensor cores
• 22 RT cores
• 12 TFLOPS
• Single slot, half height
• Dimension (L x H) 169,6 x 68,9mm

NVIDIA Quadro T1000 - Graphics card - Quadro T1000 - 8 GB GDDR6 - PCIe 3.0 x16 - 4 x miniDisplayPort

• 896 CUDA cores
• - Tensor cores
• - RT cores
• 2.5 TFLOPS
• Single slot, half height
• Dimension (L x H) 154.9 x 68.6 mm

M.2 PCIe Industrial 2-port 2.5GbE isolated Ethernet board (-40℃~+85℃) / 1x Universal Bracket with 2x RJ45 Cutout

• Dual-Lane (x2) PCI-Express with throughput up to 5.0/2.5GT/s
• Fully compliant with PCI-Express Base Specification Rev.2.1
• Integrated 10/100/1000/2500Mbps transceiver
• IEEE 802.3, IEEE802.3u, IEEE 802.3ab, IEEE 802.3z and IEEE 802.3bz compliant
• IEEE 802.3x and IEEE 802.3z flow control
• Support Wake-on-LAN

M.2 PCIe Industrial 2-port GbE isolated Ethernet board (-40℃~+85℃) / 1x Universal Bracket with 2x RJ45 Cutout

• Single-Lane (x1) PCI-Express with throughput up to 5.0/2.5Gbps
• Fully compliant with PCI-Express Base Specification Rev. 2.0
• Integrated 10/100/1000Mbps transceiver
• IEEE 802.3x Full-Duplex flow control
• IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, and IEEE 802.3z compliant
• Complies with EN61000-4-2(ESD) Air-15kV, Contact-8kV
• Complies with EN61000-4-4(EFT) 2kV
• Complies with EN61000-4-5 2kV Surge protection

M.2 2242 to single isolated CAN bus Module

• Compliant with PCI Express 1.1
• Meet the Requirements of the ISO 11898-1
• CAN bus 2.0B backward compatible with 2.0A
• Support baud rate 10/20/50/100/250/500/800/1000K
• Support CAN message acceptance filter
• Support Linux SocketCAN
• Compliant with IEC 60950-1:2005 + A1: 2009 + A2:2013 2.5kV HiPOT protection
• Compliant with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
• Termination resistor enabled/disabled by switch
• Industrial Temperature (-40°C to +85°C) support

Industrial U.3 NVMe Enterprise Grade SSD

• Compliant with PCIe Gen4x4 Interface
• Compliance: NVMe 1.4/ PCIe Base 4.0
• 3D TLC NAND Flash (eTLC)
• Capacity: 1920GB ~ 7680GB
• Powerguard Function (Power Loss Protection)
• Support AES 256-bit Encryption
• End-to-End Data Protection
• Dynamic Thermal Throttling
• Heat Dissipation Design on the Case
• Operating as Boot Disk

Industrial U.3 NVMe Enterprise Grade SSD

• Compliant with PCIe Gen4x4 Interface
• Compliance: NVMe 1.4/ PCIe Base 4.0
• 3D TLC NAND Flash (eTLC)
• Capacity: 1920GB ~ 7680GB
• Powerguard Function (Power Loss Protection)
• Support AES 256-bit Encryption
• End-to-End Data Protection
• Dynamic Thermal Throttling
• Heat Dissipation Design on the Case
• Operating as Boot Disk

Industrial U.3 NVMe Enterprise Grade SSD

• Compliant with PCIe Gen4x4 Interface
• Compliance: NVMe 1.4/ PCIe Base 4.0
• 3D TLC NAND Flash (eTLC)
• Capacity: 1920GB ~ 7680GB
• Powerguard Function (Power Loss Protection)
• Support AES 256-bit Encryption
• End-to-End Data Protection
• Dynamic Thermal Throttling
• Heat Dissipation Design on the Case
• Operating as Boot Disk

Industrial 2.5" U.2 SSD, Wide-Temp,  iCell

• PCIe Gen. 4x4, NVMe 1.4
• Excellent data transfer speed
• Heat-spreading design
• LDPC ECC engine supported.
• End-to-end Data Path Protection
• High capacity & ultra-speed

Industrial 2.5" U.2 SSD, Wide-Temp,  iCell

• PCIe Gen. 4x4, NVMe 1.4
• Excellent data transfer speed
• Heat-spreading design
• LDPC ECC engine supported.
• End-to-end Data Path Protection
• High capacity & ultra-speed

Industrial 2.5" U.2 SSD, Wide-Temp,  iCell

• PCIe Gen. 4x4, NVMe 1.4
• Excellent data transfer speed
• Heat-spreading design
• LDPC ECC engine supported.
• End-to-end Data Path Protection
• High capacity & ultra-speed

Industrial 2.5" U.2 SSD, Wide-Temp,  iCell

• PCIe Gen. 4x4, NVMe 1.4
• Excellent data transfer speed
• Heat-spreading design
• LDPC ECC engine supported.
• End-to-end Data Path Protection
• High capacity & ultra-speed

Industrial 2.5" U.2 SSD, Wide-Temp,  iCell

• PCIe Gen. 4x4, NVMe 1.4
• Excellent data transfer speed
• Heat-spreading design
• LDPC ECC engine supported.
• End-to-end Data Path Protection
• High capacity & ultra-speed

Industrial 2.5" SATA SSD, Wide-Temp, iDataGuard, iCell

• 2.5” SATA III solution for industrial field
• High IOPS
• iSMART disk health monitoring
• End to end data path protection
• iData Guard for abnormal power failure
• iCell technology for data protection

Industrial 2.5" SATA SSD, Wide-Temp, iDataGuard, iCell

• 2.5” SATA III solution for industrial field
• High IOPS
• iSMART disk health monitoring
• End to end data path protection
• iData Guard for abnormal power failure
• iCell technology for data protection

Industrial 2.5" SATA SSD, Wide-Temp, iDataGuard, iCell

• 2.5” SATA III solution for industrial field
• High IOPS
• iSMART disk health monitoring
• End to end data path protection
• iData Guard for abnormal power failure
• iCell technology for data protection

Industrial 2.5" SATA SSD, Wide-Temp, iDataGuard, iCell

• 2.5” SATA III solution for industrial field
• High IOPS
• iSMART disk health monitoring
• End to end data path protection
• iData Guard for abnormal power failure
• iCell technology for data protection

Ruggedize AI Inference System Based on NVIDIA® Jetson™ Xavier NX. This in-vehicle AI system is compact, IP67 rated, waterproof fanless design.

• Ruggedized IP67 waterproof fanless design
• Embedded with NVIDIA® Jetson Xavier™ NX up to 21 TOPS
• 2 x GbE and 4 x PoE with IEEE 802.3af compliance
• 2 x USB 3.0, 2 x CANbus, 1 x HDMI
• Linux OS with board support package (BSP)
• Supports Allxon 24/7 remote monitoring and OTA deployment

Mini-ITX SBC with LGA1700 Socket 12th Gen Intel® Core™ Processor, Intel® Q670E, 2 HDMI, DisplayPort++, eDP, 2 GbE LAN, and HD Audio

• LGA1700 socket 12th gen Intel® Core™ i7/i5/i3 processor
• Intel® Q670E chipset
• 2 DDR4 SO-DIMM for up to 64GB of memory
• 4 USB 3.2 and 4 USB 2.0
• 4 COM ports
• 2 SATA-600 and 1 M.2 Key M 2280
• 1 PCIe x16, 1 M.2 Key E 2230, and 1 M.2 Key B 3052/3042

PCI Express, 200 kS/s, 16-ch, 16-bit Simultaneously Sampled AI Board with 12-ch Isolated DI