PC Komponentit

PCIe to Four Isolated CAN FD Module

• Baud rate up to 5 / 10 / 20 / 50 / 100 / 125 / 250 / 500 (default) / 800 / 1000K
• CAN2.0 up to 7,800 frame/s (RX baud rate 1M, EID, 8byte data)
• CANFD up to 6,000 frame/s (RX baud rate 1M, data rate 5M, EID, 64byte data) 
• Data rate supports 2 / 4 / 5Mbps
• Complies with IEC 60950-1 : 2005 + A1 : 2009 + A2 : 2013 2.5kV HiPOT protection
• Complaint with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
• Termination resistor enabled / disabled by jumper
• Optional M.2 slot to expand 2 ~ 4 more CAN ports by installing EGUC series

PCIe to Dual Isolated CAN FD Module

• Baud rate up to 5 / 10 / 20 / 50 / 100 / 125 / 250 / 500 (default) / 800 / 1000K
• CAN2.0 up to 7,800 frame/s (RX baud rate 1M, EID, 8byte data)
• CANFD up to 6,000 frame/s (RX baud rate 1M, data rate 5M, EID, 64byte data) 
• Data rate supports 2 / 4 / 5Mbps
• Complies with IEC 60950-1 : 2005 + A1 : 2009 + A2 : 2013 2.5kV HiPOT protection
• Complaint with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
• Termination resistor enabled / disabled by jumper
• Optional M.2 slot to expand 2 ~ 4 more CAN ports by installing EGUC series

M.2 2280 2 port USB 3.2 board with Type-C cable

• Dual-Lane (x2) PCI-Express with throughput to 5.0/2.5 GT/s
• Fully compliant with PCI-Express Base Specification Rev.2.0
• Support simultaneous operation of multiple USB 1.1, USB 2.0, and USB 3.2 GEN1x1 devices
• Support individual two USB devices running 5Gbps at full speed
• USB data transfer rate of 1.5/12/480/5000 Mbps 
• With Type-C cable

Industrial M.2 (B+M key) PCIe USB Expansion Card

• Single-Line PCI-Express with throughput to 5.0/2.5 GT/s
• Fully compliant with PCI-Express Base Specification Rev.2.0
• Support simultaneous operation of multiple USB 1.1, USB 2.0, and USB 3.2 GEN1x1 devices
• Support individual USB devices running 5Gbps at full speed
• USB data transfer rate of 1.5/12/480/5000 Mbps 
• With Type-C cable

• Compliant with PCIe basic specification, v3.0 (compatible with PCIe v1.0 /1.1 & 2.0)
• Support PCle NVMe protocol
• Support RAID 0 ,RAID 1, JBOD
• Support 2230, 2242, 2260, 2280mm extended version SSD

mPCIe to Dual Isolated CAN FD Module

• Complies with IEC 60950-1 : 2005 + A1 : 2009 + A2 : 2013 2.5kV HiPOT protection
• Complaint with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
• Termination resistor enabled / disabled by jumper
• Supports 3rd mounting hole and USB Pin header for out-of-minicard installation
  
  
• Baud rate up to 5 / 10 / 20 / 50 / 100 / 125 / 250 / 500(default) / 800 / 1000K
• CAN2.0 up to 7,800 frame/s (RX baud rate 1M, EID, 8byte data)
• CANFD up to 6,000 frame/s (RX baud rate 1M, data rate 5M, EID, 64byte data) 
• Data rate supports 2 / 4 / 5Mbps

M.2 2280 to Four Isolated CAN FD Module

• Complies with IEC 60950-1 : 2005 + A1 : 2009 + A2 : 2013 2.5kV HiPOT protection
• Complaint with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
• Termination resistor enabled / disabled by jumper
• Additional driver to support Linux SocketCAN
• Complies with IEC 60950-1 : 2005 + A1 : 2009 + A2 : 2013 2.5kV HiPOT protection
• Complaint with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
• Termination resistor enabled / disabled by jumper
• Additional driver to support Linux SocketCAN

M.2 2280 to Dual Isolated CAN FD Module

• Complies with IEC 60950-1 : 2005 + A1 : 2009 + A2 : 2013 2.5kV HiPOT protection
• Complaint with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
• Termination resistor enabled / disabled by jumper
• Additional driver to support Linux SocketCAN
• Complies with IEC 60950-1 : 2005 + A1 : 2009 + A2 : 2013 2.5kV HiPOT protection
• Complaint with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
• Termination resistor enabled / disabled by jumper
• Additional driver to support Linux SocketCAN

Half-size PICMG 1.3 CPU Card supports LGA1700 Intel® 12th/13th/14th Gen. Core™ i9/i7/i5/i3/Pentium®/Celeron® CPU with Q670E, DDR5, HDMI™, DP, Dual Intel® 2.5GbE, USB 3.2, SATA 6Gb/s, M.2, HD Audio

• Half-size PICMG 1.3 CPU Card supports LGA1700 Intel® 12th/13th/14th Gen. Core™ i9/i7/i5/i3/Pentium®/Celeron® CPU with Q670E Support 262-pin 5200 MHz Dual-Channel DDR5 So-DIMMs
• Double independent display via DP and HDMI™
• Support Intel® I226-LM and Intel® I226V 2.5GbE controller
• Support M.2 M key expansion

Full-size PICMG 1.3 CPU Card supports LGA1700 Intel® 12th/13th/14th Gen. Core™ i9/i7/i5/i3/Pentium®/Celeron® CPU with Q670E, DDR5, HDMI™, DP, Dual Intel® 2.5GbE, USB 3.2, SATA 6Gb/s, M.2, HD Audio

• Full-size PICMG 1.3 CPU Card supports LGA1700 Intel® 12th/13th/14th Gen. Core™ i9/i7/i5/i3/Pentium®/Celeron® CPU with Q670E
• Support two 5200 MHz Dual-Channel DDR5 SDRAM Unbuffered DIMMs
• Support Intel® I226-LM and Intel® I226V 2.5GbE controller
• Support M.2 M key expansion

Pico-ITX SBC with Intel® Processor N97/Core™ i3-N305 Processor, HDMI, LVDS, and Two 2.5GbE LAN

• Intel® processor N97/Core™ i3-N305 processor
• 8GB or optional 16GB LPDDR5 on board
• Two 2.5GbE LAN ports
• M.2 Key B
• M.2 Key E

T380 Family
Industrial Half Size mSATA

• Compliant with SATA III 6.0Gb/s
• 3D TLC NAND flash memory
• Capacity: 64GB ~ 1TB
• End-to-End data protection
• SLC write cache technology
• Operating as boot disk
• Static and dynamic wear leveling
• Bad block management
• S.M.A.R.T. & TRIM command

• 26 TOPS AI Computing delivered by Hailo-8 VPU
• M.2 2242 w/ optional 2280 extensions
• -20~65°C operating temp. w/ optional heatsink
• Typical 2.5W Low power consumption
• Rich AI Dev. Toolkits including Model Library, Model Converter, Runtime SDK Integration

Industrial M.2 PCIe CAN Bus Expansion Card (-40℃~+85℃) 

• Single-Lane (x1) PCI-Express with throughput up to 5.0 / 2.5GT/s
• Fully compliant with PCI-Express Base Specification Rev. 2.0
• Meet the Requirements of the ISO 11898 High Speed Standard
• CAN bus 2.0B EFF backward compatible with 2.0A SFF
• Support baud rate 10/20/50/100/125/250/500/800/1000K
• Support CAN message acceptance filter
• Support 2.5kV isolated per port

ATX Motherboard with LGA1700 Socket 12th Gen Intel® Core™ i9/i7/i5/i3, Pentium® or Celeron® Processor, Intel® Q670E, USB 3.2 Gen1x1 , SATA 3.0, GbE and 2.5GbE LAN, VGA, DVI-D, and HDMI

• LGA1700 socket 12th gen Intel® Core™ i9/i7/i5/i3, Pentium® or Celeron® processor (Alder Lake S)
• Four 288-pin DDR4-3200 non-ECC Long-DIMM, up to 128GB
• Supports triple-view with VGA, DVI-D, and HDMI connectivity
• Supports M.2 Key M 2280 and Key B 2230
• 6 USB 3.2 Gen1x1 and 2 USB 3.2 Gen1x1 (internal)
• TPM 2.0 supported (optional)

Micro ATX Motherboard with LGA1700 Socket 13th/12th Gen Intel® Core™ Processor, Intel® H610, USB 3.2 Gen1x1 , SATA 3.0, Dual GbE, 2.5GbE, VGA, DP and DVI-D

• LGA1700 socket 13th/12th gen Intel® Core™ i9/i7/i5/i3, Pentium® or Celeron® processor (Raptor Lake S/Alder Lake S)
• Dual 288-pin DDR4-3200 Long-DIMM, up to 64GB
• DisplayPort, VGA, DVI-D with triple-view support
• Supports M.2 Key M 2280/2242
• Supports USB 3.2 Gen1x1 and USB 2.0
• Supports TPM 2.0 (optional)

NVIDIA Quadro RTX A5500 PCIe 24GB DSFH , 4 x DisplayPort, Dual Slot

• 12240 CUDA cores
• 320 Tensor cores
• 80 RT cores
• 34.1 TFLOPS
• Dual slot, Full height
• Dimension (L x H) 266.8 x 111,8 mm

NVIDIA Quadro RTX 5000 Ada 32GB PCI-Ex16 DP*4 FS , 4 x DisplayPort, Dual Slot

• 12800 CUDA cores
• 400 Tensor cores
• 100 RT cores
• 65.3 TFLOPS
• Dual slot, Full height
• Dimension (L x H) 266.8 x 111,8 mm

NVIDIA Quadro RTX 6000 Ada PCIe 48GB DSFH- 4 x DisplayPort, Dual Slot

• 18176 CUDA cores
• 568 Tensor cores
• 142 RT cores
• 91.1 TFLOPS
• Dual slot, Full height
• Dimension (L x H) 266.8 x 111,8 mm

mPCIe to dual isolated J1939/CANopen Module

• Compliant with ISO 11898-2
• Support baud rate 100/125/250/500(default)/800/1000K
• Support CAN message acceptance filter, listen-only mode
• Keep configuration after hardware reboot
• Up to 7,800 frame/s (receiving at 1Mbps, EID, 8byte data)
• Additional driver to support Linux SocketCAN
• Support SAE J1939/CANopen high layer protocol
• Termination resistor enabled/disabled by jumper
• Complies with EN61000-4-5 2.5kV Surge protection
• Complies with IEC 60950-1:2005 + A1: 2009 + A2:2013 2.5kV HiPOT protection
• Complaint with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
• Supports 3rd mounting hole and USB Pin header for out-ofminicard installation
• 30μ” golden finger, 3-year warranty
• Industrial Temperature (-40°C to +85°C) support

mPCIe to dual isolated CANbus 2.0B Module

• Compliant with ISO 11898-2
• Support baud rate 100/125/250/500(default)/800/1000K
• Support CAN message acceptance filter, listen-only mode
• Keep configuration after hardware reboot
• Up to 7,800 frame/s (receiving at 1Mbps, EID, 8byte data)
• Additional driver to support Linux SocketCAN
• Support SAE J1939/CANopen high layer protocol (Optional)
• Termination resistor enabled/disabled by jumper
• Complies with EN61000-4-5 2.5kV Surge protection
• Complies with IEC 60950-1:2005 + A1: 2009 + A2:2013 2.5kV HiPOT protection
• Complaint with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
• Supports 3rd mounting hole and USB Pin header for out-ofminicard installation
• 30μ” golden finger, 3-year warranty
• Industrial Temperature (-40°C to +85°C) support

• 200mm x 100mm x 5mm
• 6W / mK heat conductivity

PCIe x16 Dual-port 100G QSFP+ Ethernet Network Adapter(E810)

• Intel master chip scheme
• PCI Express v4.0 x16
• iWARP and RoCEv2 Remote Direct Memory Access (RDMA)
• Intel Ethernet Adaptive Virtual Function
• Enhanced server virtualizations: 256 VFs, 768 VSIs
• IEEE 1588 Precision Time Protocol with per-packet time stamping

4 xU.2 to PCIe x16 Adapter for 2.5

• 4 68-pin SFF-8639 interface connector
• Support Equipment: 4 PCIe U.2 NVMe SSD
• Ps. Motherboards and BIOS Support PCIe Bifurcation required

PCIe x4 to U.3 NVMe SSD Adapter

• PCIe 4.0 x4 to U.3 NVMe SSD Adapter
• Support：1* U.3 NVMe SSD
• Host Bus Type： PCIe 4.0 x4

Industrial 2.5" U.2 SSD, Wide-Temp,  iSLC, iDataGuard, iPowerGuard

• PCIe Gen. 4x4, NVMe 1.4
• Excellent data transfer speed
• Support iSLC technology
• Standard temperature
• iPowerguard
• iDataguard
• LDPC ECC engine supported.
• End-to-end Data Path Protection (ETEP)

Industrial 2.5" U.2 SSD, Wide-Temp,  iSLC, iDataGuard, iPowerGuard

• PCIe Gen. 4x4, NVMe 1.4
• Excellent data transfer speed
• Support iSLC technology
• Standard temperature
• iPowerguard
• iDataguard
• LDPC ECC engine supported.
• End-to-end Data Path Protection (ETEP)

Industrial 2.5" U.2 SSD, Wide-Temp,  iSLC, iDataGuard, iPowerGuard

• PCIe Gen. 4x4, NVMe 1.4
• Excellent data transfer speed
• Support iSLC technology
• Standard temperature
• iPowerguard
• iDataguard
• LDPC ECC engine supported.
• End-to-end Data Path Protection (ETEP)

Industrial 2.5" U.2 SSD, Wide-Temp,  iSLC, iDataGuard, iPowerGuard

• PCIe Gen. 4x4, NVMe 1.4
• Excellent data transfer speed
• Support iSLC technology
• Standard temperature
• iPowerguard
• iDataguard
• LDPC ECC engine supported.
• End-to-end Data Path Protection (ETEP)

 PCIe x16 to 4-Port M.2 NVMe SSD Adapter- Low Profile

• Interface Type:4*M.2 Connectors
• Support Equipment:4*M.2 NVMe PCIe 4.0 SSD for 2260,2280 and 22110mm
• Ps. Motherboards and BIOS Support PCIe Bifurcation required

PCIe x1 Single-port Gigabit SFP Ethernet Network Adapter  (Realtek RTL8111H Based)

Dual 10GbE Low Profile Ethernet Card (0℃~+55℃) with PoE+ Module, PCIex4

LGA1700 12th/13th Generation Intel® Core™ i9/i7/i5/i3 ATX Motherboard with DP/HDMI/VGA, DDR4, USB 3.2, M.2

• Intel® 12th/13th generation Core™ i9/i7/i5/i3 & Pentium®/Celeron® processor with Q670E chipset
• Four DIMM sockets up to 128 GB DDR4 3200
• Triple display DP/HDMI/VGA and dual GbE LAN
• M.2, SATA RAID 0, 1, 5, 10, USB 3.2 Gen 2
• Advantech iBMC remote out-of-band power management solution on DeviceOn
• Qualified for AWS (Amazon Web Service) IoT Greengrass
• Note 1: Legacy platform is not supported.

Intel Atom x6000E Series PICO-ITX SBC

• Intel Atom x6000E Series
• Onboard LPDDR4x up to 8GB and EMMC up to 128GB
• Support 12-24V wide voltage range -40~85°C operating temperature
• 2x GbE LAN, 2x USB3.2, 2x RS-232/422/485, I2C
• M.2 E-Key, M.2 B-Key for SATA storage and option to support RS-232 module
• Support iManager & Software APIs, WISE-DeviceOn, and EdgeAI Suite

M.2 2280 dual isolated CAN bus 2.0B Board (-40℃~+85℃)

• CAN bus 2.0B backward compatible with 2.0A
• Compliant with ISO 11898
• Support baud rate 10/20/50/100/ 125/250/500/800/1000K
• Compliant with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
• Support Card ID and Silent mode setting by switch
• Support port to computer isolation 2.5kV
• Support CAN message acceptance filter

Industrial M.2 2280 Embedded Module with iPowerguard, iDataguard

• PCIe Gen4 x4, NVMe SSD
• Kioxia 3D TLC NAND
• Standard/Wide-temperature
• iPowerguard
• iDataguard
• Dynamic Thermal Management
• Hybrid Write Mode with SLC Cache Enable
• Support write protection

Industrial M.2 2280 Embedded Module with iPowerguard, iDataguard

• PCIe Gen4 x4, NVMe SSD
• Kioxia 3D TLC NAND
• Standard/Wide-temperature
• iPowerguard
• iDataguard
• Dynamic Thermal Management
• Hybrid Write Mode with SLC Cache Enable
• Support write protection

Industrial M.2 2280 Embedded Module with iPowerguard, iDataguard

• PCIe Gen4 x4, NVMe SSD
• Kioxia 3D TLC NAND
• Standard/Wide-temperature
• iPowerguard
• iDataguard
• Dynamic Thermal Management
• Hybrid Write Mode with SLC Cache Enable
• Support write protection